A company hosts its SAP applications and database applications on Amazon EC2 instances in private subnets. The EC2 instances are distributed across two Availability Zones. In each Availability Zone, the company has created a public subnet for public applications.
An SAP solutions architect needs to use AWS services to download software patches from the internet to the EC2 instances that host the SAP applications and databases. The SAP solutions architect must design a highly available solution that protects the AWS services from a single point of failure.
Which solution will meet these requirements with the LEAST maintenance effort?

A. Provision one NAT instance in the public subnet of each Availability Zone. In the route table for each private subnet, add an entry that points to the NAT instance.

B. Provision one NAT gateway in the public subnet of each Availability Zone. In the route table for each public subnet, add an entry that points to the NAT gateway.

C. Provision one NAT gateway in the public subnet of each Availability Zone. In the route table for each private subnet, add an entry that points to the NAT gateway.

D. Provision one NAT instance in the public subnet of a third Availability Zone. In the route table for each public subnet, add an entry that points to the NAT instance in the third Availability Zone.

A company is planning to migrate its SAP S/4HANAand SAP BW/4HANA workloads to AWS. The company is currently using a third-party solution to back up its SAP HANA database and application. The company wants to retire the third-party backup solution after the migration to AWS. The company needs a backup solution on AWS to manage its SAP HANA database and application backups. The solution must provide secure storage of backups and must optimize cost.
Which solution will meet these requirements?

A. Use SAP HANA Studio, SAP HANA HDBSQL, and SAP HANA Cockpit to perform backups to local Amazon Elastic Block Store (Amazon EBS) volumes. Enable EBS volume encryption. Use AWS Backup to perform application backups with AMIs or snapshots to Amazon S3. Enable S3 encryption.

B. Use SAP HANA Cockpit to implement a backup policy and perform SAP HANA database backups to Amazon S3 with AWS Backint Agent for SAP HANA. Enable S3 encryption. Use AWS Backup with backup plans to perform application backups with AMIs or snapshots. Enable S3 encryption.

C. Use AWS Backup with backup plans to perform SAP HANA database backups to Amazon S3 with AWS Backint Agent for SAP HANA. Enable S3 encryption. Use AWS Backup with backup plans to perform application backups with AMIs or snapshots. Enable S3 encryption.

D. Use SAP HANA Studio, SAP HANA HDBSQL, and SAP HANA Cockpit to perform backups to local Amazon Elastic Block Store (Amazon EBS) volumes. Copy the backups to Amazon S3. Use AWS Backup to schedule application backups with AMIs or snapshots to Amazon S3.

A company is running SAP S/4HANA on AWS. The company has deployed its current database infrastructure on a u-12tb1.112xlarge Amazon EC2 instance that uses default tenancy and SUSE Linux Enterprise Server for SAP 15 SP1. The company must scale its SAP HANA database to an instance with more RAM. An SAP solutions architect needs to migrate the database to a u-18tb1.metal High Memory instance.
How can the SAP solutions architect meet this requirement?

A. Use the AWS Management Console to stop the current instance. Change the instance type to u-18tb1.metal. Start the instance.

B. Use the AWS CLI to stop the current instance. Change the instance type to u-18tb1.metal. Start the instance.

C. Use the AWS CLI to stop the current instance. Create an AMI from the current instance. Use the new AMI to launch a new u-18tb1.metal instance with host tenancy.

D. Use the AWS Management Console to stop the current instance. Create an AMI from the current instance. Use the new AMI to launch a new u-18tb1.metal instance with dedicated tenancy.

A company recently implemented an architecture in which all the systems and components of the company's SAP environment are hosted on AWS. Front-end users connect from the corporate data center. SAP application servers and database servers are hosted in a private subnet.
The company has the following requirements:
•	Ensure that the instances in the private subnet can connect to the internet and other AWS services.
•	Prevent instances from receiving inbound traffic that is initiated by someone on the inter-net.
•	For SAP support, allow a remote connection between the company's network and SAP. Ensure that access is available to the production environment as needed.
Which solution will meet these requirements?

A. Use a NAT gateway to ensure connectivity between the instances in the private subnet and other AWS services. Deploy SAProuter in a public subnet. Assign a public IP address that is reachable from the internet.

B. Use NAT instances to ensure connectivity between the instances in the private subnet and other AWS services. Deploy SAProuter in the private subnet with an Elastic IP address that is reachable from the internet.

C. Use a bastion host to ensure connectivity between the instances in the private subnet and other AWS services. Set up an AWS Direct Connect connection between the SAP support network and the AWS Region where the architecture is implemented.

D. Use an internet gateway to ensure connectivity between the instances in the private subnet and other AWS services. Deploy SAProuter in a public subnet. Assign a public IP address that is reachable from the internet.

A company is running SAP on premises and is using hard disk drive (HDD) cost-optimized storage to store SAP HANA archive files. The company directly mounts these disks as local file systems. The company also backs up the archives on a regular basis.
The company needs to migrate this setup to AWS.
Which solution will meet these requirements MOST cost-effectively?

A. Use General Purpose SSD (gp2) Amazon Elastic Block Store (Amazon EBS) volumes as the archive destination. Use Amazon S3 for backups. Use S3 Glacier for long-term retention of the archives.

B. Use Provisioned IOPS SSD (io1) Amazon Elastic Block Store (Amazon EBS) volumes as the archive destination. Back up the archives to Cold HDD (sc1) EBS volumes.

C. Use Provisioned IOPS SSD (io1) Amazon Elastic Block Store (Amazon EBS) volumes as the archive destination. Use Amazon S3 for backups. Use S3 Glacier for long-term retention of the archives.

D. Use Cold HDD (sc1) Amazon Elastic Block Store (Amazon EBS) volumes as the archive destination. Use Amazon S3 for backups. Use S3 Glacier for long-term retention or the archives.

A company is running its SAP applications on Oracle Database. Oracle Database is hosted on physical servers that are running SUSE Linux Enterprise Server. Because of compliance requirements, the company cannot install any additional software on its on-premises database servers. The company needs to migrate the SAP landscape to AWS and must continue to use Oracle Database.
Which migration solution should the company use to meet these requirements?

A. AWS Server Migration Service (AWS SMS)

B. AWS Application Migration Service (CloudEndure Migration)

C. SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move

D. Oracle Database replication with Oracle Data Guard

A company is running an SAP HANA database on AWS. The company is running AWS Backint Agent for SAP HANA (AWS Backint agent) on an Amazon EC2 instance. AWS Backint agent is configured to back up to an Amazon S3 bucket. The backups are failing with an AccessDenied error in the AWS Backint agent log file.
What should an SAP basis administrator do to resolve this error?

A. Assign execute permissions at the operating system level for the AWS Backint agent binary and for AWS Backint agent.

B. Assign an IAM role to an EC2 instance. Attach a policy to the IAM role to grant access to the target S3 bucket.

C. Assign the correct Region ID for the S3BucketAwsRegion parameter in AWS Backint agent for the SAP HANA configuration file.

D. Assign the value for the EnableTagging parameter in AWS Backint agent for the SAP HANA configuration file.

A global enterprise is running SAP ERP Central Component (SAP ECC) workloads on Oracle in an on-premises environment. The enterprise plans to migrate to SAP S/4HANA on AWS.
The enterprise recently acquired two other companies. One of the acquired companies is running SAP ECC on Oracle as its ERP system. The other acquired company is running an ERP system that is not from SAP. The enterprise wants to consolidate the three ERP systems into one ERP system on SAP S/4HANA on AWS. Not all the data from the acquired companies needs to be migrated to the final ERP system. The enterprise needs to complete this migration with a solution that minimizes cost and maximizes operational efficiency.
Which solution will meet these requirements?

A. Perform a lift-and-shift migration of all the systems to AWS. Migrate the ERP system that is not from SAP to SAP ECC. Convert all three systems to SAP S/4HANA by using SAP Software Update Manager (SUM) Database Migration Option (DMO). Consolidate all three SAP S/4HANA systems into a final SAP S/4HANA system. Decommission the other systems.

B. Perform a lift-and-shift migration of all the systems to AWS. Migrate the enterprise’s initial system to SAP HANA, and then perform a conversion to SAP S/4HANA. Consolidate the two systems from the acquired companies with this SAP S/4HANA system by using the Selective Data Transition approach with SAP Data Management and Landscape Transformation (DMLT).

C. Use SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move to re-architect the enterprise’s initial system to SAP S/4HANA and to change the platform to AWS. Consolidate the two systems from the acquired companies with this SAP S/4HANA system by using the Selective Data Transition approach with SAP Data Management and Landscape Transformation (DMLT).

D. Use SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move to re-architect all the systems to SAP S/4HANA and to change the platform to AWS. Consolidate all three SAP S/4HANA systems into a final SAP S/4HANA system. Decommission the other systems.

A company is running an SAP HANA database on AWS. The company wants to manage historical, infrequently accessed warm data for a native SAP HANA use case. An SAP solutions architect needs to recommend a solution that can provide online data storage in extended store, available for queries and updates. The solution must be an integrated component of the SAP HANA database and must allow the storage of up to five times more data in the warm tier than in the hot tier.
Which solution will meet these requirements?

A. Use Amazon Data Lifecycle Manager (Amazon DLM) with SAP Data Hub to move data in and out of the SAP HANA database to Amazon S3.

B. Use an SAP HANA extension node.

C. Use SAP HANA dynamic tiering as an optional add-on to the SAP HANA database.

D. Use Amazon Data Lifecycle Manager (Amazon DLM) with SAP HANA spark controller so that SAP HANA can access the data through the Spark SQL SDA adapter.

A company is planning to implement its production SAP HANA database with an XS Advanced runtime environment on AWS. The company must provision the necessary AWS resources and install the SAP HANA database within 1 day to meet an urgent business request. The company must implement a solution that minimizes operational effort.
Which combination of steps should the company take to meet these requirements? (Choose two.)

A. Install XS Advanced runtime by using the SAP HANA database lifecycle manager (HDBLCM).

B. Provision AWS resources by using the AWS Management Console. Install SAP HANA by using the SAP HANA database lifecycle manager (HDBLCM).

C. Use AWS Launch Wizard for SAP.

D. Develop and use AWS CloudFormation templates to provision the AWS resources.

E. Evaluate and identify the certified Amazon EC2 instances and Amazon Elastic Block Store (Amazon EBS) volume types for SAP HANA.

A company plans to migrate its SAP NetWeaver deployment to AWS. The deployment runs on a Microsoft SQL Server database. The company plans to change the source database from SQL Server to SAP HANA as part of this process.
Which migration tools or methods should an SAP solutions architect use to meet these requirements? (Choose two.)

A. SAP HANA classical migration

B. SAP HANA system replication

C. SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move

D. SAP HANA backup and restore

E. SAP homogeneous system copy

A company is planning to deploy a new SAP NetWeaver ABAP system on AWS with an Oracle database that runs on an Amazon EC2 instance. The EC2 instance uses a Linux-based operating system. The company needs a database storage solution that provides flexibility to adjust the IOPS regardless of the allocated storage size.
Which solution will meet these requirements MOST cost-effectively?

A. General Purpose SSD (gp3) Amazon Elastic Block Store (Amazon EBS) volumes

B. Amazon Elastic File System (Amazon EFS) Standard-Iinfrequent Access (Standard-IA) storage class

C. Amazon FSx for Windows File Server

D. Provisioned IOPS SSD (io2) Amazon Elastic Block Store (Amazon EBS) volumes

A company migrated its SAP ERP Central Component (SAP ECC) environment to an m4.large Amazon EC2 instance (Xen based) in 2016. The company changed the instance type to m5.xlarge (KVM based). Since the change, users are receiving a pop-up box that indicates that the SAP license will expire soon.
What could be the cause of this issue?

A. The change from the Xen-based m4.large instance type to the KVM-based m5.xlarge instance type is not allowed.

B. The Xen-based m4.large instance was running with a lower kernel patch level (SAP Kernel 7.49 Patch Level 401). When the change to a KVM-based instance occurred, the hardware key changed. The instance requires a new license.

C. The Xen-based m4.large instance was running with a higher kernel patch level (SAP Kernel 7.49 Patch Level 500). When the change to a KVM-based instance occurred, the hardware key changed. The instance requires a new license.

D. Whenever an instance type changes, the change requires a new license.

A company is planning to migrate its on-premises SAP ERP Central Component (SAP ECC) system on SAP HANA to AWS. Each month, the system experiences two peaks in usage. The first peak is on the 21st day of the month when the company runs payroll. The second peak is on the last day of the month when the company processes and exports credit data. Both peak workloads are of high importance and cannot be rescheduled.
The current SAP ECC system has six application servers, all of a similar size. During normal operation outside of peak usage, four application servers would suffice.
Which purchasing option will meet the company’s requirements MOST cost-effectively on AWS?

A. Four Reserved Instances and two Spot Instances

B. Six On-Demand Instances

C. Six Reserved Instances

D. Four Reserved Instances and two On-Demand Instances

A company has deployed SAP workloads on AWS. The AWS Data Provider for SAP is installed on the Amazon EC2 instance where the SAP application is running. An SAP solutions architect has attached an IAM role to the EC2 instance with the following policy:
 
The AWS Data Provider for SAP is not returning any metrics to the SAP application.
Which change should the SAP solutions architect make to the IAM permissions to resolve this issue?

A. Add the cloudwatch:ListMetrics action to the policy statement with Sid AWSDataProvider1.

B. Add the cloudwatch:GetMetricStatistics action to the policy statement with Sid AWSDataProvider1.

C. Add the cloudwatch:GetMetricStream action to the policy statement with Sid AWSDataProvider1.

D. Add the cloudwatch:DescribeAlarmsForMetric action to the policy statement with Sid AWSDataProvider1.

A company is planning to migrate its SAP Business Warehouse (SAP BW) 7.5 system on SAP HANA from on premises to AWS. The production database is 4 TB in size and has a scale-out architecture that consists of three nodes. Each node has 2 TB of memory. The company needs to keep the three SAP HANA nodes in the target architecture.
Which solution on AWS will provide the HIGHEST throughput for the SAP HANA database?

A. Implement SAP HANA scale-out Amazon EC2 instances with default tenancy.

B. Implement SAP HANA scale-out Amazon EC2 instances with Capacity Reservations in a cluster placement group.

C. Implement SAP HANA scale-out Amazon EC2 instances in a spread placement group.

D. Implement SAP HANA scale-out Amazon EC2 instances in a partition placement group.

A company has deployed SAP workloads on AWS. The company's SAP applications use an IBM Db2 database and an SAP HANA database. An SAP solutions architect needs to create a solution to back up the company's databases.
Which solution will meet these requirements MOST cost-effectively?

A. Use an Amazon Elastic Block Store (Amazon EBS) volume to store backups for the databases. Run a periodic script to move the backups to Amazon S3 and to delete the backups from the EBS volume.

B. Use AWS Backint Agent for SAP HANA to move the backups for the databases directly to Amazon S3.

C. Use an Amazon Elastic Block Store (Amazon EBS) volume to store backups for the Db2 database. Run periodic scripts to move the backups to Amazon S3 and to delete the backups from the EBS volume. For the SAP HANA database, use AWS Backint Agent for SAP HANA to move the backups directly to Amazon S3.

D. Use Amazon Elastic File System (Amazon EFS) to store backups for the databases.

A company’s basis administrator is planning to deploy SAP on AWS in Linux. The basis administrator must set up the proper storage to store SAP HANA data and log volumes.
Which storage options should the basis administrator choose to meet these requirements? (Choose two.)

A. Amazon Elastic Block Store (Amazon EBS) Throughput Optimized HDD (st1)

B. Amazon Elastic Block Store (Amazon EBS) Provisioned OPS SSD (io1, io2)

C. Amazon S3

D. Amazon Elastic File System (Amazon EFS)

E. Amazon Elastic Block Store (Amazon EBS) General Purpose SSD (gp2, gp3)

A company plans to move its SAP systems from on premises to AWS to reduce infrastructure costs. The company is willing to make a 3-year commitment. However, the company wants to have maximum flexibility for the selection of Amazon EC2 instances across AWS Regions, instance families, and instance sizes.
Which purchasing option will meet these requirements at the LOWEST cost?

A. Spot Instances

B. 3-year Compute Savings Plan

C. 3-year EC2 Instance Savings Plan

D. 3-year Reserved Instances

An SAP engineer is configuring AWS Backint Agent for SAP HANA (AWS Backint agent) for an SAP HANA database that is running on an Amazon EC2 instance. After the configuration, the backups fail. During investigation, the SAP engineer notices that the AWS Backint agent logs contain numerous AccessDenied messages.
Which actions should the SAP engineer take to resolve this issue? (Choose two.)

A. Update the EC2 role permissions to allow S3 bucket access.

B. Verify that the configuration file has the correct formatting of the S3BucketOwnerAccountID.

C. Install AWS Systems Manager Agent (SSM Agent) correctly by using the sudo command.

D. Install the correct version of Python for AWS Backint agent.

E. Add the execute permission to the AWS Backint agent binary.

A company has an SAP Business One system that runs on SUSE Linux Enterprise Server 12 SP3. The company wants to migrate the system to AWS. An SAP solutions architect selects a homogeneous migration strategy that uses AWS Application Migration Service (CloudEndure Migration).
After the server migration process is finished, the SAP solutions architect launches an Amazon EC2 test instance from the R5 instance family. After a few minutes, the EC2 console reports that the test instance has failed an instance status check. Network connections to the instance are refused.
How can the SAP solutions architect solve this problem?

A. Reboot the instance to initiate instance migration to another host.

B. Request an instance limit increase for the AWS Region where the test instance is being launched.

C. Create a ticket for AWS Support that documents the test server instance ID. Wait for AWS to update the host of the R5 instance.

D. Install the missing drivers on the source system. Wait for the completion of migration synchronization. Launch the test instance again.

A company is running SAP HANA as the database for all its SAP systems on AWS. The company has a production SAP landscape and a non-production SAP landscape in the same VPC. The company has deployed AWS Backint Agent for SAP HANA (AWS Backint agent) to store backups in an S3 bucket. The S3 bucket is encrypted and is configured with an S3 Lifecycle management policy that moves backup data that is older than 3 days to the S3 Glacier Flexible Retrieval storage class.
An SAP engineer needs to perform a system copy by restoring the previous week's full backup of the production SAP HANA instance to the non-production SAP HANA instance.
Which combination of steps must the SAP engineer take before the SAP engineer initiates the restoration procedure? (Choose two.)

A. Update the AWS Backint agent configuration file of the non-production SAP HANA instance with the details of the AWS Backint agent configuration of the production instance.

B. Move the database backup files from the S3 Glacier Flexible Retrieval storage class to the S3 Standard storage class.

C. Reset the default encryption behavior of the S3 bucket to use S3 managed encryption keys.

D. Update the AWS Backint agent to the most recent version.

E. Update the SAP HANA database to the most recent supported version.

A company wants to improve the RPO and RTO for its SAP disaster recovery (DR) solution by running the DR solution on AWS. The company is running SAP ERP Central Component (SAP ECC) on SAP HANA. The company has set an RPO of 15 minutes and an RTO of 4 hours.
The production SAP HANA database is running on a physical appliance that has x86 architecture. The appliance has 1 TB of memory, and the SAP HANA global allocation limit is set to 768 GB. The SAP application servers are running as VMs on VMware, and they store data on an NFS file system. The company does not want to change any existing SAP HANA parameters that are related to data and log backup for its on-premises systems.
What should an SAP solutions architect do to meet the DR objectives MOST cost-effectively?

A. For the SAP HANA database, change the log backup frequency to 5 minutes. Move the data and log backups to Amazon S3 by using the AWS CLI or AWS DataSync. Launch the SAP HANA database. For the SAP application servers, export the VMs as AMIs by using the VM Import/Export feature from AWS. For NFS file shares /sapmnt and /usr/sap/trans, establish real-time synchronization from DataSync to Amazon Elastic File System (Amazon EFS).

B. For the SAP HANA database, change the log backup frequency to 5 minutes. Move the data and log backups to Amazon S3 by using AWS Storage Gateway File Gateway. For the SAP application servers, export the VMs as AMIs by using the VM Import/Export feature from AWS. For NFS file shares /sapmnt and /usr/sap/trans, establish real-time synchronization from AWS DataSync to Amazon Elastic File System (Amazon EFS).

C. For the SAP HANA database, SAP application servers, and NFS file shares, use CloudEndure Disaster Recovery to replicate the data continuously from on premises to AWS. Use CloudEndure Disaster Recovery to launch target instances in the event of a disaster.

D. For the SAP HANA database, use a smaller SAP certified Amazon EC2 instance. Use SAP HANA system replication with ASYNC replication mode to replicate the data continuously from on premises to AWS. For the SAP application servers, use CloudEndure Disaster Recovery for continuous data replication. For NFS file shares /sapmnt and /usr/sap/trans, establish real-time synchronization from AWS DataSync to Amazon Elastic File System (Amazon EFS).

An SAP solutions architect is leading the SAP basis team for a company. The company’s SAP landscape includes SAP HANA database instances for the following systems: sandbox, development, quality assurance test (QAT), system performance test (SPT), and production. The sandbox, development, and QAT systems are running on Amazon EC2 On-Demand Instances. The SPT and production systems are running on EC2 Reserved instances. All the EC2 instances are using Provisioned IOPS SSO (io2) Amazon Elastic Block Store (Amazon EBS) volumes.
The entire development team is in the same time zone and works from 8 AM to 6 PM. The sandbox system is for research and testing that are not critical. The SPT and production systems are business critical. The company runs load-testing jobs and stress-testing jobs on the QAT systems overnight to reduce testing duration. The company wants to optimize infrastructure cost for the existing AWS resources.
How can the SAP solutions architect meet these requirements with the LEAST amount of administrative effort?

A. Use a Spot Fleet instead of the Reserved Instances and On-Demand Instances.

B. Use Amazon EventBridge (Amazon CloudWatch Events) and Amazon CloudWatch alarms to stop the development and sandbox EC2 instances from 7 PM every night to 7 AM the next day.

C. Make the SAP basis team available 24 hours a day, 7 days a week to use the AWS CLI to stop and start the development and sandbox EC2 instances manually.

D. Change the EBS volume type to Throughput Optimized HDD (st1) for the /hana/data and /hana/log file systems for the production and non-production SAP HANA databases.

A data analysis company has two SAP landscapes that consist of sandbox, development, QA, pre-production, and production servers. One landscape is on Windows, and the other landscape is on Red Hat Enterprise Linux. The servers reside in a room in a building that other tenants share.
An SAP solutions architect proposes to migrate the SAP applications to AWS. The SAP solutions architect wants to move the production backups to AWS and wants to make the backups highly available to restore in case of unavailability of an on-premises server.
Which solution will meet these requirements MOST cost-effectively?

A. Take a backup of the production servers. Implement an AWS Storage Gateway Volume Gateway. Create file shares by using the Storage Gateway Volume Gateway. Copy the backup files to the file shares through NFS and SMB.

B. Take a backup of the production servers. Send those backups to tape drives. Implement an AWS Storage Gateway Tape Gateway. Send the backups to Amazon S3 Standard-Infrequent Access (S3 Standard-IA) through the S3 console. Move the backups immediately to S3 Glacier Deep Archive.

C. Implement a third-party tool to take images of the SAP application servers and database server. Take regular snapshots at 1-hour intervals. Send the snapshots to Amazon S3 Glacier directly through the S3 Glacier console. Store the same images in different S3 buckets in different AWS Regions.

D. Take a backup of the production servers. Implement an Amazon S3 File Gateway. Create file shares by using the S3 File Gateway. Copy the backup files to the file shares through NFS and SMB. Map backup files directly to Amazon S3. Configure an S3 Lifecycle policy to send the backup files to S3 Glacier based on the company’s data retention policy.

A company wants to run SAP HANA on AWS in the eu-central-1 Region. The company must make the SAP HANA system highly available by using SAP HANA system replication. In addition, the company must create a disaster recovery (DR) solution that uses SAP HANA system replication in the eu-west-1 Region. As prerequisites, the company has confirmed that Inter-AZ latency is less than 1 ms and that Inter-Region latency is greater than 1 ms.
Which solutions will meet these requirements? (Choose two.)

A. Install the tier 1 primary system and the tier 2 secondary system in eu-central-1. Configure the tier 1 system in Availability Zone 1. Configure the tier 2 system in Availability Zone 2. Configure SAP HANA system replication between tier 1 and tier 2 by using ASYNC replication mode. Install the DR tier 3 secondary system in eu-west-1 by using SYNC replication mode.

B. Install the tier 1 primary system and the tier 2 secondary system in eu-central-1. Configure the tier 1 system in Availability Zone 1. Configure the tier 2 system in Availability Zone 2. Configure SAP HANA system replication between tier 1 and tier 2 by using SYNC replication mode. Install the DR tier 3 secondary system in eu-west-1 by using ASYNC replication mode.

C. Install the tier 1 primary system and the tier 2 secondary system in eu-central-1. Configure the tier 1 system in Availability Zone 1. Configure the tier 2 system in Availability Zone 2. Configure SAP HANA system replication between tier 1 and tier 2 by using SYNC replication mode. Install the DR tier 3 secondary system in eu-west-1. Store daily backups from tier 1 in an Amazon S3 bucket in eu-central-1. Use S3 Cross-Region Replication to copy the daily backups to eu-west-1, where they can be restored if needed.

D. Install the tier 1 primary system in eu-central-1. Install the tier 2 secondary system and the DR tier 3 secondary system in eu-west-1. Configure the tier 2 system in Availability Zone 1. Configure the tier 3 system in Availability Zone 2. Configure SAP HANA system replication between all tiers by using ASYNC replication mode.

E. Install the tier 1 primary system and the tier 2 secondary system in eu-central-1. Configure the tier 1 system in Availability Zone 1. Configure the tier 2 system in Availability Zone 2. Configure SAP HANA system replication between tier 1 and tier 2 by using SYNCMEM replication mode. Install the DR tier 3 secondary system in eu-west-1 by using ASYNC replication mode.

A company is evaluating options to migrate its on-premises SAP ERP Central Component (SAP ECC) EHP 8 system to AWS. The company does not want to make any changes to the SAP versions or database versions. The system runs on SUSE Linux Enterprise Server and SAP HANA 2.0 SPS 05. The existing on-premises system has a 1 TB database.
The company has 1 Gbps or internet bandwidth available for the migration. The company must complete the migration with the least possible downtime and disruption to business.
Which solution will meet these requirements?

A. Install SAP ECC EHP 8 on Amazon EC2 instances. Use the same SAP SID and kernel version that the source system uses. Install SAP HANA on EC2 instances. Use the same version of SAP HANA that the source system uses. Take a full backup of the source SAP HANA database to disk. Copy the backup by using an AWS Storage Gateway Tape Gateway. Restore the backup on the target SAP HANA instance that is running on Amazon EC2.

B. Install SAP ECC EHP 8 on Amazon EC2 instances. Use the same SAP SID and kernel version that the source system uses. Install SAP HANA on EC2 instances. Use the same version of SAP HANA that the source database uses. Establish replication at the source, and register the SAP HANA instance that is running on Amazon EC2 as secondary. After the systems are synchronized, initiate a takeover so that the SAP HANA instance that is running on Amazon EC2 becomes primary. Shut down the on-premises system. Start SAP on the EC2 instances.

C. Install SAP ECC EHP 8 on Amazon EC2 instances. Use the same SAP SID and kernel version that the source system uses. Install SAP HANA on EC2 instances. Use the same version that the source system uses. Take a full offline backup of the source SAP HANA database. Copy the backup to Amazon S3 by using the AWS CLI. Restore the backup on a target SAP HANA instance that runs on Amazon EC2. Start SAP on the EC2 instances.

D. Take an offline SAP Software Provisioning Manager export of the on-premises system. Use an AWS Storage Gateway File Gateway to transfer the export. Import the export on Amazon EC2 instances to create the target SAP system.

A company decides to deploy SAP non-production systems on AWS by using the standard installation model in a single Availability Zone. The company will use Amazon Elastic File System (Amazon EFS) to host SAP file systems such as /sapmnt and /usr/sap/trans.
The company launches the required Amazon EC2 instances to host these systems. However, the company cannot mount the EFS file systems to the respective EC2 instances. An SAP engineer needs to adjust the security groups that are assigned to the EC2 instances and EFS file systems to allow traffic between the EC2 instances and the EFS file systems.
Which combination of steps should the SAP engineer take to meet these requirements? (Choose two.)

A. Configure the security groups that are associated with the EFS file systems to allow inbound access for the TCP protocol on the NFS port (TCP 2049) from all EC2 instances where the file systems are mounted.

B. Configure the security groups that are associated with the EFS file systems to allow outbound access for the TCP protocol on the NFS port (TCP 2049) from all EC2 instances where the file systems are mounted.

C. Configure the security groups that are associated with the EFS file systems to allow outbound access from the security group of the corresponding EC2 instances on the NFS port (TCP 2049).

D. Configure the security groups that are associated with the EC2 instances to allow inbound access to the EFS file systems on the NFS port (TCP 2049).

E. Configure the security groups that are associated with the EC2 instances to allow outbound access to the EFS file systems on the NFS port (TCP 2049).

A company needs to implement high availability for its SAP S/4HANA system on AWS. The company will use a SUSE Linux Enterprise Server clustering solution in private subnets across two Availability Zones. An SAP solutions architect must ensure that the solution can route traffic to the active SAP instance in this clustered configuration.
What should the SAP solutions architect do to meet these requirements?

A. Implement the SAP cluster solution by using a secondary private IP address. Reassign the secondary private IP address from one network interface to another network interface in the event of any failure that affects the primary instance.

B. Implement the SAP cluster solution by using an Elastic IP address. Mask the failure of an instance or software by rapidly remapping the address to another instance in the account.

C. Implement the SAP cluster solution by using a public IP address. Use this public IP address for communication between the instances and the internet.

D. Implement the SAP cluster solution by using an overlay IP address that is outside the CIDR block of the VPC. Use overlay IP address routing to dynamically update the route table to point to the active node and provide external access by using a Network Load Balancer or AWS Transit Gateway.

A company is running its SAP system on AWS with a secondary SAP HANA database in a sidecar setup. The company requires high IOPS for write performance on its Amazon Elastic Block Store (Amazon EBS) volumes for the secondary SAP HANA database.
The EBS volume that the company uses for its SAP HANA data volume cannot provide the required IOPS. Instance bandwidth for the Amazon EC2 instance that is hosting the SAP HANA database is sufficient. An SAP solutions architect needs to propose a solution to resolve the IOPS performance issue.
Which solution will achieve the required IOPS?

A. Replace the EBS storage with EC2 instance store storage.

B. Create a RAID 0 configuration with several EBS volumes.

C. Use Amazon EC2 Auto Scaling to launch Spot Instances.

D. Create a placement group with several EBS volumes.

A company is running its on-premises SAP ERP Central Component (SAP ECC) production system on an Oracle database. The company needs to migrate the system to AWS and change the database to SAP HANA on AWS.
The system must be highly available. The company also needs a failover system to be available in a different AWS Region to support disaster recovery (DR). The DR solution must meet an RTO of 4 hours and an RPO of 30 minutes. The sizing estimate for the SAP HANA database on AWS is 4 TB.
Which combination of steps should the company take to meet these requirements? (Choose two.)

A. Deploy the production system and the DR system in two Availability Zones in the same Region.

B. Deploy the production system across two Availability Zones in one Region. Deploy the DR system in a third Availability Zone in the same Region.

C. Deploy the production system across two Availability Zones in the primary Region. Deploy the DR system in a single Availability Zone in another Region.

D. Create an Amazon Elastic File System (Amazon EFS) file system in the primary Region for the SAP global file system. Deploy a second EFS file system in the DR Region. Configure EFS replication between the file systems.

E. Set up Amazon Elastic Block Store (Amazon EBS) to store the shared file system data. Configure AWS Backup for DR.

A company runs its SAP Business Suite on SAP HANA systems on AWS. The company's production SAP ERP Central Component (SAP ECC) system uses an x1e.32xlarge (memory optimized) Amazon EC2 instance and is 3.5 TB in size.
Because of expected future growth, the company needs to resize the production system to use a u-* EC2 High Memory instance. The company must resize the system as quickly as possible and must minimize downtime during the resize activities.
Which solution will meet these requirements?

A. Resize the instance by using the AWS Management Console or the AWS CLI.

B. Create an AMI of the source system Launch a new EC2 High Memory instance that is based on that AMI.

C. Launch a new EC2 High Memory instance. Install and configure SAP HANA on the new instance by using AWS Launch Wizard for SAP. Use SAP HANA system replication to migrate the data to the new instance.

D. Launch a new EC2 High Memory instance. Install and configure SAP HANA on the new instance by using AWS Launch Wizard for SAP. Use SAP HANA backup and restore to back up the source system directly to Amazon S3 and to migrate the data to the new instance.

A company is running its on-premises SAP ERP Central Component (SAP ECC) system on an Oracle database on Oracle Enterprise Linux. The database is 1 TB in size and uses 27,000 IOPS for its peak performance Multiple SSD volumes are striped to store Oracle data files in separate sapdata directories to gain the required IOPS.
The company is planning to move this workload to AWS. The company chooses high I/O bandwidth instances with a Nitro hypervisor to host the target database instance. Downtime is not a constraint for the migration. The company needs an Amazon Elastic Block Store (Amazon EBS) storage layout that optimizes cost for the migration.
How should the company reorganize the Oracle data files to meet these requirements?

A. Reorganize the Oracle data files into one 9 TB General Purpose SSD (gp2) EBS volume.

B. Reorganize the Oracle data files into a striped volume of three 3 TB General Purpose SSD (gp2) EBS volumes.

C. Reorganize the Oracle data files into one 1 TB General Purpose SSD (gp3) EBS volume with 27,000 provisioned IOPS.

D. Reorganize the Oracle data files into ten 100 GB General Purpose SSD (gp3) EBS volumes.

A global retail company is running its SAP landscape on AWS. Recently, the company made changes to its SAP Web Dispatcher architecture. The company added an additional SAP Web Dispatcher for high availability with an Application Load Balancer (ALB) to balance the load between the two SAP Web Dispatchers.
When users try to access SAP through the ALB, the system is reachable. However, the SAP backend system is showing an error message. An investigation reveals that the issue is related to SAP session handling and distribution of requests. The company confirmed that the system was working as expected with one SAP Web Dispatcher. The company replicated the configuration of that SAP Web Dispatcher to the new SAP Web Dispatcher.
How can the company resolve the error?

A. Maintain persistence by using session cookies. Enable session stickiness (session affinity) on the SAP Web Dispatchers by setting the wdisp/HTTP/esid_support parameter to True.

B. Maintain persistence by using session cookies. Enable session stickiness (session affinity) on the ALB.

C. Turn on host-based routing on the ALB to route traffic between the SAP Web Dispatchers.

D. Turn on URL-based routing on the ALB to route traffic to the application based on URL.

A company is starting a new project to implement an SAP landscape with multiple accounts that belong to multiple teams in the us-east-2 Region. These teams include procurement, finance, sales, and human resources. An SAP solutions architect has started designing this new landscape and the AWS account structures.
The company wants to use automation as much as possible. The company also wants to secure the environment, implement federated access to accounts, centralize logging, and establish cross-account security audits. In addition, the company’s management team needs to receive a top-level summary of policies that are applied to the AWS accounts.
What should the SAP solutions architect do to meet these requirements?

A. Use AWS CloudFormation StackSets to apply SCPs to multiple accounts in multiple Regions. Use an Amazon CloudWatch dashboard to check the applied policies in the accounts.

B. Use an AWS Elastic Beanstalk blue/green deployment to create IAM policies and apply them to multiple accounts together. Use an Amazon CloudWatch dashboard to check the applied policies in the accounts.

C. Implement guardrails by using AWS CodeDeploy and AWS CodePipeline to deploy SCPs into each account. Use the CodePipeline deployment dashboard to check the applied policies in the accounts.

D. Apply SCPs through AWS Control Tower. Use the AWS Control Tower integrated dashboard to check the applied policies in the accounts.

A company is deploying SAP Business Suite on SAP HANA by using two Amazon EC2 bare metal instances. The company has set up a Pacemaker cluster for SAP HANA. The cluster is set up between the two instances, which are configured to use SAP HANA system replication.
An SAP engineer notices that the overlay IP address is not reachable from the application servers. The overlay IP address is only reachable locally on the database cluster. Which actions should the SAP engineer take to resolve this issue? (Choose three.)

A. Turn off the source/destination check on each bare metal instance.

B. Modify the security groups to ensure that the minimal ports for connectivity between the application server and the database are opened.

C. Add a route table entry to the route tables for the subnets of both bare metal instances for the overlay IP address.

D. Ensure that both bare metal instances are in the same subnet.

E. Perform a failover and tailback by using the Pacemaker cluster. Check whether the overlay IP address routing is functioning correctly.

F. Move the Pacemaker cluster to EC2 VM instances instead of bare metal instances.

A company hosts multiple SAP applications on Amazon EC2 instances in a VPC. While monitoring the environment, the company notices that multiple port scans are attempting to connect to SAP portals inside the VPC. These port scans are originating from the same IP address block. The company must deny access to the VPC from all the offending IP addresses for the next 24 hours.
Which solution will meet this requirement?

A. Modify network ACLs that are associated with all public subnets in the VPC to deny access from the IP address block.

B. Add a rule in the security group of the EC2 instances to deny access from the IP address block.

C. Create a policy in AWS Identity and Access Management (IAM) to deny access from the IP address block.

D. Configure the firewall in the operating system of the EC2 instances to deny access from the IP address block.

A company is planning to migrate its on-premises production SAP HANA system to AWS. The company uses a SUSE Linux Enterprise High Availability Extension two-node cluster to protect the system against failure. The company wants to use the same solution to provide high availability for the landscape on AWS.
Which combination of prerequisites must the company fulfill to meet this requirement? (Choose two.)

A. Use instance tags to identify the instances in the cluster.

B. On the cluster, configure an overlay IP address that is outside the VPC CIDR range to access the active instance.

C. On the cluster, configure an overlay IP address that is within the VPC CIDR range to access the active instance.

D. On the cluster, configure an Elastic IP address that is outside the VPC CIDR range to access the active instance.

E. On the cluster, configure an Elastic IP address that is within the VPC CIDR range to access the active instance.

A company that has SAP workloads on premises plans to migrate an SAP environment to AWS. The company is new to AWS and has no prior setup. The company has the following requirements:
The application server and database server must be placed in isolated network configurations.
SAP systems must be accessible to the on-premises end users over the internet.
The cost of communications between the application server and the database server must be minimized.
Which combination of steps should an SAP solutions architect take to meet these requirements? (Choose two.)

A. Configure a Network Load Balancer for incoming connections from end users.

B. Set up an AWS Site-to-Site VPN connection between the company’s on-premises network and AWS.

C. Separate the application server and the database server by using different VPCs.

D. Separate the application server and the database server by using different subnets and network security groups within the same VPC.

E. Set up an AWS Direct Connect connection with a private VIF between the company’s on-premises network and AWS.

A company has implemented its ERP system on SAP S/4HANAon AWS. The system is based on Enqueue Standalone Architecture (ENSA2) and is highly available.
As part of an availability test, the company failed over its system to secondary nodes in the second Availability Zone. When the system failed over, the initial licenses were no longer valid.
What could be the reason for this behavior?

A. The company needs to apply SAP licenses after each failover.

B. The cluster configuration is not correct.

C. The company needs two separate sets of licenses for ASCS instances in each Availability Zone.

D. The company stopped and restarted the secondary node as part of the last maintenance.

A company is migrating its SAP workloads to AWS. The company’s IT team installs a highly available SAP S/4HANA system that uses the SAP HANA system replication cluster package on SUSE Linux Enterprise Server. The IT team deploys the system by using cluster nodes in different Availability Zones within the same AWS Region.
After the initial launch of the SAP application, the application is accessible. However, after failover, the IT team cannot access the application even though the system is up and running on the secondary node. After investigation, an SAP solutions architect discovers that the virtual IP address has not been used correctly.
Which combination of steps should the SAP solutions architect take to resolve this problem? (Choose two.)

A. Use an overlay IP address as a secondary IP address with the primary node of the cluster.

B. Choose an overlay IP address within the VPC CIDR block that corresponds with the secondary node of the cluster.

C. Use an overlay IP address as a virtual IP address.

D. Choose an overlay IP address within the VPC CIDR block that corresponds with the primary node of the cluster.

E. Choose an overlay IP address outside the VPC CIDR block that hosts the application and the database.

A company is running an SAP Commerce application in a development environment. The company is ready to deploy the application to a production environment on AWS.
The company expects the production application to receive a large increase in transactions during sales and promotions. The application's database must automatically scale the storage, CPU, and memory to minimize costs during periods of low demand and maintain high availability and performance during periods of high demand.
Which solution will meet these requirements?

A. Use an SAP HANA single-node deployment that runs on burstable performance Amazon EC2 instances.

B. Use an Amazon Aurora MySQL database that runs on serverless DB instance types.

C. Use a HyperSQL database that runs on Amazon Elastic Container Service (Amazon ECS) containers with ECS Service Auto Scaling.

D. Use an Amazon RDS for MySQL DB cluster that consists of high memory DB instance types.

A company’s SAP basis team is responsible for database backups in Amazon S3. The company frequently needs to restore the last 3 months of backups into the pre-production SAP system to perform tests and analyze performance. Previously, an employee accidentally deleted backup files from the S3 bucket. The SAP basis team wants to prevent accidental deletion of backup files in the future.
Which solution will meet these requirements?

A. Create a new resource-based policy that prevents deletion of the S3 bucket.

B. Enable versioning and multi-factor authentication (MFA) on the S3 bucket.

C. Create signed cookies for the backup files in the S3 bucket. Provide the signed cookies to authorized users only.

D. Apply an S3 Lifecycle policy to move the backup files immediately to S3 Glacier.

An SAP solutions architect is using AWS Systems Manager Distributor to install the AWS Data Provider for SAP on production SAP application servers and SAP HANA database servers. The SAP application servers and the SAP HANA database servers are running on Red Hat Enterprise Linux.
The SAP solutions architect chooses instances manually in Systems Manager Distributor and schedules installation. The installation fails with an access and authorization error related to Amazon CloudWatch and Amazon EC2 instances. There is no error related to AWS connectivity.
What should the SAP solutions architect do to resolve the error?

A. Install the CloudWatch agent on the servers before installing the AWS Data Provider for SAP.

B. Download the AWS Data Provider for SAP installation package from AWS Marketplace. Use an operating system super user to install the agent manually or through a script.

C. Create an IAM role. Attach the appropriate policy to the role. Attach the role to the appropriate EC2 instances.

D. Wait until Systems Manager Agent is fully installed and ready to use on the EC2 instances. Use Systems Manager Patch Manager to perform the installation.

A company is preparing a greenfield deployment of SAP S/4HANA on AWS. The company wants to ensure that this new SAP S/4HANA landscape is fully supported by SAP. The company's SAP solutions architect needs to set up a new SAProuter connection directly to SAP from the company's landscape within the VPC.
Which combination of steps must the SAP solutions architect take to accomplish this goal? (Choose three.)

A. Launch the instance that the SAProuter software will be installed on into a private subnet of the VPC. Assign the instance an Elastic IP address.

B. Launch the instance that the SAProuter software will be installed on into a public subnet of the VPC. Assign the VPC an Elastic IP address.

C. Launch the instance that the SAProuter software will be installed on into a public subnet of the VPAssign the instance an overlay IP address.

D. Create a specific security group for the SAProuter instance. Configure rules to allow the required inbound and outbound access to the SAP support network. Include a rule that allows inbound traffic to TCP port 3299.

E. Create a specific security group for the SAProuter instance. Configure rules to allow the required inbound and outbound access to the SAP support network. Include a rule that denies inbound traffic to TCP port 3299.

F. Use a Secure Network Communication (SNC) internet connection.

A company wants to deploy its SAP S/4HANA workload on AWS. The company will need to deploy additional SAP S/4HANA systems during the next year to meet the demands of planned projects. The company wants to adopt a DevOps model for deployment of additional SAP S/4HANA systems. The company’s project team needs to be able to provision new SAP S/4HANA systems with minimum user inputs.
An SAP solutions architect must design a solution that can automate most of the implementation tasks. The solution must allow project team members to implement additional SAP S/4HANA systems with minimum required authorizations.
Which solution will meet these requirements with the LEAST operational overhead?

A. Deploy an SAP S/4HANA system by using AWS Launch Wizard for SAP. Create an AWS Service Catalog product. Authorize the project team to use the AWS Service Catalog product for future deployments of additional SAP S/4HANA systems.

B. Provision an Amazon EC2 instance by using an AWS CloudFormation template. Use SAP Software Provisioning Manager to install an SAP S/4HANA system on the EC2 instance to create a base image. Create an Amazon Elastic Block Store (Amazon EBS) snapshot of the SAP S/4HANA system. Create an AWS Service Catalog product for the EC2 instance launch and the EBS snapshot restore. Authorize the project team to use AWS Service Catalog to launch additional EC2 Instances and restore EBS snapshots to new SAP S/4HANA instances.

C. Create a base SAP S/4HANA system on an Amazon EC2 instance by using SAP Software Provisioning Manager. Create a custom AMI from the installed SAP S/4HANA base system. Use the custom AMI for future deployments of additional SAP S/4HANA systems.

D. Provision an Amazon EC2 instance by using an AWS CloudFormation template. Use SAP Software Provisioning Manager to install an SAP S/4HANA system on the EC2 instance to create a base image. Create a custom AMI from the SAP S/4HANA system. Create an AWS Service Catalog product for the C2 instance launch and the custom AMI restore. Authorize the project team to use AWS Service Catalog to launch additional SAP S/4HANA instances.

A company has grown rapidly in a short period of time. This growth has led to an increase in the volume of data, the performance requirements for storage, and the memory and vCPU requirements for the company's SAP HANA database that runs on AWS. The SAP HANA database is a scale-up installation. Because of the increased requirements, the company plans to change the Amazon EC2 instance type to a virtual EC2 High Memory instance and plans to change the Amazon Elastic Block Store (Amazon EBS) volume type to a higher performance volume type for the SAP HANA database.
The EC2 instance is a current-generation instance, both before and after the change. Additionally, the EC2 instance and the EBS volume meet all the prerequisites for instance type change and EBS volume type change. An SAP basis administrator must advise the company about whether these changes will require downtime for the SAP system.
Which guidance should the SAP basis administrator provide to the company?

A. The change in EC2 instance type does not require SAP system downtime, but the change in EBS volume type requires SAP system downtime.

B. The change in EC2 instance type requires SAP system downtime, but the change in EBS volume type does not require SAP system downtime.

C. Neither the change in EC2 instance type nor the change in EBS volume type requires SAP system downtime.

D. Both the change in EC2 instance type and the change in EBS volume type require SAP system downtime.

A company is running its SAP workload on AWS. The company’s security team has implemented the following requirements:
All Amazon EC2 instances for SAP must be SAP certified instance types.
Encryption must be enabled for all Amazon S3 buckets and Amazon Elastic Block Store (Amazon EBS) volumes.
AWS CloudTrail must be activated.
SAP system parameters must be compliant with business rules.
Detailed monitoring must be enabled for all instances.
The company wants to develop an automated process to review the systems for compliance with the security team’s requirements. The process also must provide notification about any deviation from these standards.
Which solution will meet these requirements?

A. Use AWS AppConfig to model configuration data in an AWS Systems Manager Automation runbook. Schedule this Systems Manager Automation runbook to monitor for compliance with all the requirements. Integrate AWS AppConfig with Amazon CloudWatch for notification purposes.

B. Use AWS Config managed rules to monitor for compliance with all the requirements. Use Amazon EventBridge (Amazon CloudWatch Events) and Amazon Simple Notification Service (Amazon SNS) for email notification when a resource is flagged as noncompliant.

C. Use AWS Trusted Advisor to monitor for compliance with all the requirements. Use Trusted Advisor preferences for email notification when a resource is flagged as noncompliant.

D. Use AWS Config managed rules to monitor for compliance with the requirements, except for the SAP system parameters. Create AWS Config custom rules to validate the SAP system parameters. Use Amazon EventBridge (Amazon CloudWatch Events) and Amazon Simple Notification Service (Amazon SNS) for email notification when a resource is flagged as noncompliant.

An SAP engineer is designing a storage configuration for an SAP S/4HANA production system on AWS. The system will run on an Amazon EC2 instance with a memory size of 2 TB. The SAP HANA sizing report recommends storage of 2,400 GB for data and 512 GB for logs. The system requires 9,000 IOPS for data storage and throughput of 300 MBps for log storage.
Which Amazon Elastic Block Store (Amazon EBS) volume configuration will meet these requirements MOST cost-effectively?

A. For /hana/data, use two 900 GB Provisioned IOPS SSD (io1) EBS volumes that are configured with RAID 0 striping and the required IOPS. For /hana/log, use one 512 GB General Purpose SSD (gp3) EBS volume that is configured with the required throughput.

B. For /hana/data, use one 2,400 GB General Purpose SSD (gp3) EBS volume that is configured with the required IOPS. For /hana/log, use one 512 GB gp3 EBS volume that is configured with the required throughput.

C. For /hana/data use two 1,200 GB Provisioned IOPS SSD (io2) EBS volumes that are configured with RAID 0 striping and the required IOPS. For /hana/log, use one 525 GB io2 EBS volume that is configured with the required throughput.

D. For /hana/data, use two 1,200 GB General Purpose SSD (gp3) EBS volumes that are configured with RAID 0 striping and the required IOPS. For /hana/log, use one 512 GB gp3 EBS volume that is configured with the required throughput.

A company needs to migrate its SAP HANA landscape from an on-premises data center to AWS. The company's existing SAP HANA database instance is oversized. The company must resize the database instance as part of the migration.
Which combination of steps should the company take to ensure that the target Amazon EC2 instance is sized optimally for the SAP HANA database instance? (Choose two.)

A. Determine the peak memory utilization of the existing on-premises SAP HANA system.

B. Determine the average memory utilization of the existing on-premises SAP HANA system.

C. For the target system, select any SAP certified EC2 instance that provides more memory than the current average memory utilization.

D. For the target system, select the smallest SAP certified EC2 instance that provides more memory than the current peak memory utilization.

E. For the target system, select any current-generation EC2 memory optimized instance.