JN0-360 Dump Free – 50 Practice Questions to Sharpen Your Exam Readiness.
Looking for a reliable way to prepare for your JN0-360 certification? Our JN0-360 Dump Free includes 50 exam-style practice questions designed to reflect real test scenarios—helping you study smarter and pass with confidence.
Using an JN0-360 dump free set of questions can give you an edge in your exam prep by helping you:
- Understand the format and types of questions you’ll face
- Pinpoint weak areas and focus your study efforts
- Boost your confidence with realistic question practice
Below, you will find 50 free questions from our JN0-360 Dump Free collection. These cover key topics and are structured to simulate the difficulty level of the real exam, making them a valuable tool for review or final prep.
An established RSVP-signaled LSP suffers a link failure.
What is one action taken by the local RSVP-enabled router?A. A ResvTear message is sent downstream.
B. A ResvErr message is sent upstream.
C. A ResvErr message is sent downstream.
D. A ResvTear message is sent upstream.
Â
What are two characteristics of load-balancing implementation on a Junos device? (Choose two.)A. It balances packets on a per-packet basis.
B. It balances packets on a per-flow basis.
C. It is enabled through a policy.
D. It is enabled by default.
Â
You are troubleshooting an OSPF adjacency that is stuck in the ExStart state.
What would be the correct step to resolve the problem?A. Look for a mismatched IP subnet or mask.
B. Determine whether the neighbor is a DR-Other.
C. Determine whether the hello and dead intervals are the same on both sides.
D. Review the MTU settings to ensure that they match.
Â
Which statement is true of a Layer 2 circuit?A. Layer 2 circuits use BGP for signaling
B. Layer 2 circuits use OSPF for signaling
C. Layer 2 circuits use LDP for signaling
D. Layer 2 circuits rely on RSVP for signaling
Â
Click the Exhibit button.
Referring to the exhibit, which two statements are correct about R2? (Choose two.)A. If R2 remains in the ExStart state, then you should verify the MTU setting on R2 and R3.
B. R2 LSDB is synchronized with R1.
C. If R2 remains in the ExStart state, then you should verify Physical Layer and Data Link Layer connectivity on R2 and R3.
D. R2 LSDB is not synchronized with R1.
Â
What are three BGP attributes used in the route-selection process? (Choose three.)A. local preference
B. communities
C. MED
D. origin
E. atomic aggregate
Â
By default, which two tasks does an Ethernet bridge perform in response to receiving a multicast frame? (Choose two.)A. It learns the MAC address of any responding nodes and updates its bridge table with the source MAC address and ingress port
B. It drops the frame
C. It floods the frame out of all interfaces except the one on which it was received
D. It floods the frame out of particular interfaces based on its multicast MAC table.
Â
You are asked to configure and apply a new routing policy to influence routing advertisements sent to a specific EBGP peer. You must ensure that the new policy does not impact routing advertisements sent to any other peer.
In this scenario, which statement is true?A. The new policy should be applied as an export policy for the EBGP group in which the peer is defined.
B. The new policy should be applied as an import policy for the EBGP group in which the peer is defined.
C. The new policy should be applied as an export policy for the specific EBGP peer.
D. The new policy should be applied as an import policy for the specific EBGP peer.
Â
Using industry best practices, which two BGP attributes would you modify to influence how traffic enters your network? (Choose two)A. AS Path
B. Local Preference
C. Next Hop
D. MED
Â
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain, by default. Which two tasks does the bridge perform in response to receiving a multicast frame?
(Choose two)A. It learns the source MAC address
B. It drops the frame
C. It floods the frame out of all interfaces except the one on which it was received
D. It floods the frame out of particular interfaces based on its multicast MAC table
Â
Using industry best practices, what is true regarding an external BGP session?A. BGP neighbors belong to the same AS
B. BGP neighbors belong to a different AS
C. BGP sessions rely on a static route for reach ability
D. BGP sessions will be established between loopback interface addresses.
Â
Which Junos platform supports provider bridging?A. T Series devices
B. SRX Series devices
C. MX Series devices
D. MAG Series devices
Â
You have recently installed a second Routing Engine (RE) in your router
Which two statements correctly describe the expected behavior if the primary RE fails?
(Choose two.)A. The backup RE will assume the master role once the packet forwarding engine restarts
B. The backup RE will immediately assume the master role
C. The new master RE restarts the routing protocol process (rpd) and establishes any required adjacencies based on the configuration.
D. The new master RE maintains the existing protocol adjacencies initially established by the previous master RE
Â
Click the Exhibit button.
Which two statements are true regarding the output shown in the exhibit? (Choose two.)A. The ge-1/0/0 interface will transmit any outgoing frames associated with VLAN 55 as untagged frames.
B. The ge-1/0/0 interface will associate any untagged frames that are received with VLAN 56.
C. The ge-1/0/0 interface will associate any untagged frames that are received with VLAN 55.
D. The ge-1/0/0 interface will transmit any outgoing frames associated with VLAN 56 as untagged frames.
Â
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain. Which two tasks does an Ethernet bridge perform in response to receiving a frame with an unknown unicast destination MAC address? (Choose two.)A. It drops the frame.
B. It floods the frame out of all interfaces except the one on which is was received.
C. It learns the destination MAC address when it sees return traffic from the device.
D. It learns the source MAC address when it sees return traffic from that device.
Â
You are configuring a trunk interface on an MX Series device and want to ensure that any outgoing frames associated with VLAN 100 are transmitted as untagged frames.
Which configuration will achieve this objective?A. routing-interface irb.0
B. vlan-id-list [100]
C. native-vlan-id 100
D. vlan-id 100
Â
Click the Exhibit button.
Referring to the exhibit, which static route will be exported into OSPF?A. 172.29.0.0/16
B. 172.29.0.0/17
C. 172.28.0.0/24
D. 172.29.0.0/24
Â
Click the Exhibit button -
You work for the regional Internet service provider shown in the exhibit You have a partial BGP table and are receiving a 10 100/16 route from your upstream ISP
You have been asked to configure a default route that can be sent to your downstream customer This route should forward customer traffic toward your upstream
Tier 11SP as long as the 10.100/16 route is present.
What would accomplish this goal?A. Create and announce an aggregate default route
B. Create and announce a static default route with a next-hop of discard
C. Create and announce a static default route with a next-hop of reject
D. Create and announce a generated default route
E. Create an advertise-map with exist-map
Â
What are three IS-IS PDU types? (Choose three.)A. type length value
B. link-state
C. partial sequence number
D. database description
E. complete sequence number
Â
You are configuring OSPF on a Junos device; however, you have not configured a router ID.
What is the default behavior in this situation?A. If the loopback is configured with a 127/8 address, it will be used.
B. If the loopback is not configured, it will use the interface with the highest IP address.
C. If the loopback is configured and does not have a usable address, the IP address associated with the first hardware interface is used.
D. If you configure a dedicated management address and include that interface in OSPF, it will be used as the router ID.
Â
You are logged into a Junos device and issue the command show route protocol bgp. You see that the device has received the route 10 0.4/24 from two different
IBGP peers. Local preference, MED, origin, and AS-path values are equal.
Which criterion is used to determine which path will be preferred?A. cluster length
B. router ID (RID)
C. peer ID
D. IGP cost
Â
Using industry best practices, which BGP attribute would you modify to influence how traffic leaves your network?A. MED
B. local preference
C. AS-path
D. communities
Â
You observe that VPN routes are hidden on your PE router Which situation accounts for these hidden routes?A. The protocol next-hop is not found in inet.3
B. The protocol next-hop is not found in mpls 0
C. The protocol next-hop is not found in bgp I3vpn 0
D. The protocol next-hop is not found in inet 2
Â
Click the Exhibit button -
Based on the illustration shown in the exhibit, what would PE-B do with a VPLS packet received from PE-A if the matching entry in its VPLS routing table showed the destination was connected to PE-D?A. PE-B would flood the packet to all attached PEs
B. PE-B would forward the packet to the root PE device
C. PE-B would forward the packet to all attached CE devices
D. PE-B would discard the packet
Â
Click the Exhibit button.
Referring to the exhibit, all interswitch links are configured as trunks supporting all VLANs. Host A sends a frame with an unknown destination MAC address to S2.
Which switches will receive this frame?A. S1, S3 and S4
B. S1 only
C. S1 and S3 only
D. S1 and S4 only
Â
By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)A. protocol
B. source port
C. destination port
D. source address
E. destination address
Â
Click the Exhibit button.
In the exhibit, R1, R2, and R3 are all IBGP peers within AS 65505. R1 receives a BGP advertisement from an external BGP peer in AS 65555, and a BGP advertisement from R3. The default BGP advertisement behavior is in effect in this environment.
In this scenario, which two statements are true? (Choose two.)A. R1 will advertise the route received from R3 to R2 and its external BGP peer.
B. R1 will advertise the route received from R3 only to its external BGP peer.
C. R1 will advertise the route received from its external peer to R2 and R3.
D. R1 will not advertise the route received from its external peer to R2 or R3.
Â
Which three functions are performed by an OSPF area border router (ABR)? (Choose three)A. flooding Summary LSAs to connected areas
B. flooding ASBR Summary LSAs to connected areas
C. generating all Router LSAs for connected neighbors
D. performing summarization on routes headed to Area 0
E. flooding NSSA External LSAs to Area 0
Â
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)A. The routes in inet.0 are imported into user-a.inet.0
B. The RIB group can be applied to OSPF.
C. The RIB group cannot be applied to OSPF.
D. The routes in user-a.inet.0 are imported into inet.0
Â
The gr-0/0/0.0 interface on your Junos device has a link state of up/up and you have correctly added static routes to reach the remote subnets. However, you are not seeing traffic pass over the tunnel. What might be causing the issue?A. The tunnel interfaces are disabled
B. You have not configured keepalives on the endpoints
C. The endpoints do not have valid routes to the remote tunnel endpoints
D. The intermediary devices do not have valid routes to the route tunnel endpoints
Â
You are logged in to an MX80 and issue the command "show route protocol bgp" You see that you have received the route 10.0.4/24 from two different peers.
One peer is an external peer and the other is an internal peer. The route received from the internal peer is active.
By the rules of BGP preference, what would cause the internal path for this prefix to be preferred over the external one?A. Internally learned prefix is preferred over an externally learned prefix
B. The local-preference value of the internally learned prefix is higher than the externally learned peer
C. The peer ID of the internally learned prefix is lower than that of the externally learned peer
D. The internally learned prefix has a shorted cluster length
Â
What are three ways that graceful Routing Engine switchover provides redundancy? (Choose three.)A. by preserving interface and kernel information
B. by reducing time of RE failover
C. by preserving the data plane information
D. by preserving the control plane information
E. by not restarting the PFE
Â
Which two statements are true about unified ISSU? (Choose two.)A. It allows gradual implementation of new features.
B. It reduces operating costs while delivering higher service levels.
C. It involves network down time during software image upgrades.
D. It requires graceful Routing Engine switchover (GRES) and nonstop active routing (NSR).
Â
-- Exhibit
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, you have an established RSVP LSP between R1 and R5 when you experience a link failure between R2 and R4.
Which two statements are correct? (Choose two.)A. R2 sends a ResvTear message upstream to R1 signaling the link failure.
B. R2 sends a PathTear message upstream to R1 signaling the link failure.
C. R4 sends a ResvTear message downstream to R5 signaling the link failure.
D. R4 sends a PathTear message downstream to R5 signaling the link failure.
Â
Which two events could cause the BGP Active state to appear? (Choose two.)A. The local router does not have a route to the peer device.
B. The local router failed to establish a TCP connection with the peer device.
C. A firewall is stopping all UDP packets.
D. The BGP configuration is incomplete.
Â
-- Exhibit --
protocols {
isis {
level 1 disable;
interface ge-1/0/0.0 {
level 2 disable;
}
interface ge-1/1/0.0;
interface lo0.0;
}
}
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, what is the resulting behavior on interface ge-1/0/0?A. Level 1 is enabled.
B. Level 1 is disabled.
C. Level 2 is enabled.
D. Level 1 and Level 2 are disabled.
Â
-- Exhibit --
{master}[edit]
user@router-RE0# run show task replication
Stateful Replication: Enabled -
RE modE. Master -
Protocol Synchronization Status
OSPF Complete
RIP Complete
BGP Complete
MPLS Complete
LDP Complete
{master}[edit]
user@router-RE0# run show bgp summary | find 192.168.1.1
192.168.1.1 65056 0 0 11:14 Establ inet.0: 0/0/0/0 inet.2: 0/0/0/0 bgp.l3vpn.0: 0/0/0/0
...
{backup}[edit]
user@router-RE1# run show system switchover
Graceful switchover: On -
Configuration databasE. Ready -
Kernel databasE. Synchronizing -
Peer statE. Steady State -
{backup}[edit]
user@router-RE1# run show bgp summary | find 192.168.1.1
192.168.1.1 65056 306 581 0 7 7 Idle
-- Exhibit --
Click the Exhibit button.
You have been asked to determine if an NSR switchover will be hitless for a given BGP peer.
Referring to the exhibit, which statement is true?A. The BGP session is idle on the backup RE indicating that the session will flap at switchover.
B. The task replication process has completed on the master indicating a hitless switchover can be expected.
C. The GRES synchronization process is underway and must complete before the protocol state can be checked.
D. The BGP session is idle on the backup RE which is normal; it toggles to established at mastership change.
Â
How many equal-cost paths can be assigned to a single route in the Junos OS?A. 4
B. 16
C. 32
D. 64
Â
Click the Exhibit button -
In an RSTP network, the root and designated ports have been elected as shown in the exhibit
What will be the port type of port 1?A. backup port
B. discarding port
C. alternate port
D. listening port
Â
You are asked to deploy OSPF between two routers over a point-to point link.
Which three fields in the OSPF hello packet must match? (Choose three.)A. network mask
B. hello interval
C. options
D. dead interval
E. backup designated router
Â
Which two statements are correct about neighbor discovery in IPv6? (Choose two.)A. Neighbor discovery relies on ARP to find neighbors on a local link.
B. A neighbor is considered reachable when the neighboring device responds to a neighbor solicitation message.
C. A neighbor is considered reachable when the neighboring device responds to a router solicitation message.
D. Neighbor discovery does not use ARP to find neighbors on a local link.
Â
Your network consists of multiple remote locations using both IPv4 and IPv6. You have an IPv4-based Internet connection at each site provided by different, local service providers. You are asked to ensure that the remote IPv6 networks are able to communicate.
What should you do?A. Create GRE tunnels between the remote locations to connect the IPv6 networks.
B. Create IPsec tunnels between the remote locations to connect the IPv6 networks.
C. Create IP-IP tunnels between the remote locations to connect the IPv6 networks.
D. Create MPLS tunnels between the remote locations to connect the IPv6 networks.
Â
Which two statements are true about MPLS VPNs? (Choose two.)A. With Layer 3 VPNs, the provider’s routers participate in the customer’s Layer 3 routing.
B. MPLS VPNs are designed to run over private networks rather than the public Internet.
C. With Layer 2 VPNs, the provider does not participate in the routing of the customer’s private IP traffic.
D. MPLS VPN tunnels are always encrypted.
Â
A route to the same destination is received from two different BGP sources.
Which criterion is considered first to determine the active BGP route?A. cluster length
B. AS-path length
C. lowest RID
D. local preference
Â
Which two support tunneling for non-IP protocols on Junos devices? (Choose two.)A. ATM AAL2
B. GRE
C. IP-IP
D. ATM AAL1
Â
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the locally connected CE router's interface. The address of the interface is 192.168.1.1; the VPN routing-instance is named VPN-A. Which command will accomplish this task?A. ping routing-instance VPN-A 192.168.1.1
B. ping instance VPN-A 192.168.1.1
C. ping vpn-instance VPN-A 192.168.1.1
D. ping VPN-A 192.168.1.1
E. ping mpls l3vpn VPN-A 192.168.1.1
Â
On a Junos device with dual Routing Engine (RE), which two statements correctly describe the expected behavior if the primary RE fails? (Choose two.)A. The backup RE will assume the master role once the packet forwarding engine (PFE) restarts
B. The backup RE will immediately assume the master role
C. The new master RE restarts the routing protocol process (rpd) and establishes any required adjacencies based on the configuration.
D. The new master RE maintains the existing protocol adjacencies initially established by the previous master RE
Â
Click the Exhibit button -
Referring to the exhibit, which policy would be applied to the 75.217.12.10 neighbor?A. The my-statics policy would be applied.
B. The my-aggregates policy would be applied.
C. The my-specifics policy would be applied.
D. The my-statics, my-aggregates, and my-specifics policies would be applied.
Â
Your company has purchased two new Juniper Networks MX480 routers. Your manager has asked you to add these two devices to the existing ISIS network.
Which two rules about ISIS adjacencies must you consider when carrying out the configuration? (Choose two)A. For Level 1 adjacencies, area IDs must be the same
B. For Level 2 adjacencies area IDs must be the same
C. The IS-IS levels configured on the interfaces must be the same
D. The IS-IS levels on the interfaces can be different
Â
Click the Exhibit button -
In the exhibit, OSPF routers R1, R2, R3, and R4 come up, in order, at 1-minute intervals
Which router will be the designated router?.A. R1
B. R2
C. R3
D. R4
Â
Access Full JN0-360 Dump Free
Looking for even more practice questions? Click here to access the complete JN0-360 Dump Free collection, offering hundreds of questions across all exam objectives.
We regularly update our content to ensure accuracy and relevance—so be sure to check back for new material.
Begin your certification journey today with our JN0-360 dump free questions — and get one step closer to exam success!