A company uses Dynamics 365 Supply Chain Management.
The working time template is left blank when the period template is configured.
You need to determine the workdays that will be used in the inventory replenishment reporting.
Which workdays will be used?

A. calendar setup on the warehouse

B. system calendar for the country

C. 5-day work week

D. system date dimensions

E. 7-day work week

HOTSPOT -
A company that has three legal entities is implementing Dynamics 365 Supply Chain Management.
One legal entity supplies the other two legal entities as customers with inventory. Intercompany master planning must be set up and run in the least amount of time.
You need to configure the system to meet the requirements.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
 

You need to configure the limited-edition bicycle to meet the requirement for the official release date.
Where should you configure this?

A. Released product

B. Sales price trade agreement

C. Product lifecycle state

D. Default order settings

SIMULATION -
You are a functional consultant for a company named Contoso Entertainment System USA (USMF).
You need to configure a new quality process for item number M0017. The process must meet the following requirements:
✑ Perform an impedance test on 100 percent of the units purchased.
✑ Initiate the test after the product receipt is posted.
To complete this task, sign in to Dynamics 365 portal.

A company uses Dynamics 365 Supply Chain Management.
You create a product by using an incorrect product dimension group. The product has not yet been released to the legal entities.
You need to determine whether you can change the product dimension group.
Which two conditions must be met? Each answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Dimensions must not be specified for the product master.

B. The item must not already be validated.

C. Dimensions must be specified that match the original but not the new product dimension group.

D. The product master must not be released to any legal entities.

HOTSPOT -
Employee3 needs to schedule deliveries.
How should Employee3 plan for a carrier to deliver goods to Store2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
 

You need to address the inventory costing requirements.
What are two possible ways to achieve the goal? Each answer represents a complete solution.
NOTE: Each correct selection is worth one point.

A. Use FIFO with marking.

B. Create purchase orders from sales orders.

C. Set up commodity pricing.

D. Create a costing version.

E. Set up a costing sheet.

A company operates a chain of retail coffee shops and a distribution center. Each coffee shop and the distribution center are distinct warehouses.
Cups and lids are replenished from a single distribution center.
You need to configure store replenishment for coffee cup lids.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Set the coverage plan by dimension for warehouse on the Storage dimension group.

B. Set the minimum item coverage to the safety stock quantity. Set the maximum to the maximum quantity of stock to reorder above the safety stock quantity.

C. Set the minimum item coverage to the safety stock quantity. Set the maximum item coverage to 0.

D. Create a coverage group assignment for the item.

E. Set the minimum item coverage to 0. Set the maximum item coverage to the number of lids to keep on hand.

DRAG DROP -
A distribution company uses Dynamics 365 Supply Chain Management.
Users in the warehouse must have the ability to create and process transfer orders from a mobile device.
You need to complete the setup.
Which areas should you configure? To answer, drag the appropriate areas to the correct prerequisites. Each area may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
 

HOTSPOT -
You need to configure the system to support regional sales requirements.
Which group assignments should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
 

A company uses Dynamics 365 Supply Chain Management.
A customer negotiated a sales price for 100 items for the next 60 days. Management reviews reports on how many items the customer has purchased at this price. The customer has an existing order for the agreed sales agreement quantity. The customer calls to add an additional quantity that exceeds the sales agreement maximum amount. The customer is not entitled to the discounted sales price outside of the agreement.
You need to ensure that the customer receives the ordered amount and that the management reports are correct.
Which action should you perform?

A. Modify the sales agreement quantity as unconfirmed.

B. Edit the sales order quantity and when prompted to save changes, select Yes.

C. Modify the sales agreement to clear the Max Enforced checkbox and do not confirm.

D. Create a new sales order for the quantity that exceeds the sales agreement amount.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are the purchasing manager at a manufacturing company that makes audio equipment.
You sign an agreement with a vendor to purchase 5,000 speaker cables, item C0001, at a discounted rate of $3.00 per cable. This agreement expires in exactly one year.
You need to set up pricing information and track the fulfillment of the agreement.
Solution: On the released product, set a price of $3.00. Add the vendor to the vendor account field on the Purchase fast tab.
Does the solution meet the goal?

A. Yes

B. No

HOTSPOT
-
A distribution company uses Dynamics 365 Supply Chain Management.
A high-volume warehouse for the distribution company automatically releases transfer order lines to the warehouse throughout the day.
Order line quantities are frequently changed after release to the warehouse. However, the load lines are not always updated.
You need to configure automatic updates to the load lines.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
 

A manufacturing company uses Dynamics 365 Supply Chain Management.
The company replaced its burners to limit carbon dioxide emissions. The new burners require frequent servicing to be compliant with environmental regulations. The new burners are more complex and take longer to service than the previous burners.
The production controller must track fuel use in liters to schedule timely maintenance. The additional time taken to plan maintenance must be considered.
You must configure the system to meet the requirements.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Register consumption.

B. Configure counter types.

C. Set up asset service level.

D. Configure asset BOM.

E. Create attributes.

You are the warehouse manager at a distribution center.
In the warehouse, items must be moved to a staging location before moving to the baydoor location for shipping.
You need to set up a work template that accomplishes this pick/put scenario.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Create one work class ID with valid location types of staging and baydoor. Assign these to the work template details.

B. Create two work templates: one is a pick/put from inventory to staging and the other is from staging to baydoor.

C. Create a sales order work template with two pick/put pairs: one to staging and the second to baydoor.

D. Create two work class IDs: one with valid put location types of staging and the other of baydoor. Assign these to the appropriate put work types on the work template.

DRAG DROP
-
A cosmetics company uses Dynamics 365 Supply Chain Management. You configure a single legal entity.
Items must be created for a new product line of lipsticks. The lipsticks will have similar characteristics and will be sold in two sizes: trial size and full size. The lipsticks will also have colors and product lines assigned to item numbers. Each lipstick must be assigned a unique item number.
Historically, users manually entered items for new product lines and incorrectly and inconsistently set up the associated values.
You need to define the setup for the items and configurations.
What should you configure? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
 

A company has multiple legal entities. The company is implementing Dynamics 365 Supply Chain Management.
Purchase orders are generated from multiple legal entities. To reduce shipping costs, the purchase orders must be consolidated into multiple shipping containers of the same type and placed onto a single vessel for inbound receipt into the country/region.
You need to configure the path of the shipping containers.
What should you configure?

A. Journey

B. Voyage

C. Route

D. Route segment

HOTSPOT -
You need to configure a product attribute to indicate whether a product is a limited edition.
Which configuration should you use for each attribute. To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
 

Your company uses a Dynamics 365 Supply Chain Management system.
You have been tasked with configuring an agreement that gives clients a specified discount per unit if they buy a certain amount of a particular item.
The parameters are as follows:
✑ 51 to 100 `" 10 %/unit
✑ 101 and more `" 15 %/unit
You configure a purchase agreement.
Does the action achieve your objective?

A. Yes, it does

B. No, it does not

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company plans to simplify interactions between purchasing department employees and vendors.
You need to ensure that employees are redirected to a vendor's online store to select items for inclusion on purchase requisitions.
Solution: Create a retail product catalog.
Does the solution meet the goal?

A. Yes

B. No

DRAG DROP -
A company wants to expand their purchasing power by enhancing their current procurement catalog in Dynamics 365 Supply Chain Management.
The company wants to redirect to external websites to help build their purchase requisitions.
You need to set up an external catalog.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
 

A company manufactures and sells custom bicycles. Customers can customize some components to create a custom bicycle.
You need to configure sales orders to support the customization allowed for custom bicycle orders.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. Create a sales order for the bicycle and make configuration selections on the order for the upgraded seat and handlebars. The production order will be automatically generated with the correct seat and handlebars.

B. Create a sales order for the bicycle and add separate line items for the upgraded seat and handlebars.

C. Create a sales order for the bicycle. Modify the production order after it has been reported as finished to delete the standard seat and handlebars and add the upgraded seat and handlebars.

D. Configure the product to allow for the seat and handlebars selection to be defined at order creation, automatically adding an upcharge to the sales price.

DRAG DROP -
A company is designing a new bicycle by using a dimension-based Bill of materials (BOM).
The configuration groups have been defined and created.
You need to set up a BOM for the new bicycle.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
 

HOTSPOT
-
A distribution company uses Dynamics 365 Supply Chain Management.
A customer contacts the company to identify a defect in an ordered part. Additional quantities of the defective item are in stock. The defective items require a task that will trigger an action for the items and a label printed.
You need to configure the system.
Which features should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
 

You have been tasked with configuring inventory cycle counting for a client that makes use of Dynamics 365 Supply Chain Management.
You need to make of a cycle counting method that allows a worker to count items in a warehouse location at any time, without creating cycle counting work.
Which of the following is the option you should use?

A. User directed

B. Cycle count grouping

C. System directed

D. Spot cycle counting

HOTSPOT
-
A company uses Dynamics 365 Supply Chain Management. The company uses a Business Unit financial dimension. The dimension is required on items and posted on transactions.
The company wants to update item costs but exclude the required financial dimension. The change must include a warning to users before the update. The costing method should be calculated based on the expected, calculated cost to produce an item.
You must configure the system to meet the requirements.
Which actions should you perform? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
 

You are making use of planning optimization in Dynamics 365 Supply Chain Management.
When a planning optimization job, which is configured with the wrong runtime filters, is accidentally triggered from the user interface, you are tasked with fixing the problem.
Which of the following actions should you take?

A. You should access the plan history to cancel the job.

B. You should access the dialog box to cancel the job.

C. You should access the plan history to rectify runtime filters.

D. You should access the dialog box to rectify runtime filters.

You are implementing Dynamics 365 Supply Chain Management for a company that uses bill of materials (BOM) templates to expedite setup in the system.
A line must be removed from the BOM, but the system does not allow this.
You need to determine why you are unable to perform this deletion.
Why are you unable to delete the line?

A. The BOM template version has already been saved.

B. The local version of the BOM template has been associated to a service object.

C. The local version of the BOM template has been modified.

D. The BOM template has been associated to a service object.

You need to segregate inventory for the brakes that are in inventory.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Assign a blocked status to the inbound purchase order from VendorA.

B. Create a disposition code.

C. Set default inventory status on the item.

D. Assign an item filter code.

E. Assign a blocked status to the inbound purchase order from VendorB.

You need to configure the system to support the inventory costing requirement.
Which two actions should you perform? Each answer represents a complete solution.
NOTE: Each correct selection is worth one point.

A. one default item group for all items

B. one item group each for perfume, ceramicware, and other goods

C. one FIFO item model group and one Standard item model group

D. one FIFO item group

E. one financial dimension for each item group

A company uses Dynamics 365 Supply Chain Management.
The company obtains packaging cartons in metric tons and sells them as individual items. The packaging cartons come in various sizes and are maintained as product variants.
You need to configure unit conversion for the packaging cartons.
What should you do?

A. Enable unit of measure conversions in the product master. Configure the intra-class unit conversion feature in the Organization administration module.

B. Disable unit of measure conversions in the product master. Configure the inter-class unit conversion feature in the Organization administration module.

C. Enable unit of measure conversions in the product master. Configure the inter-class unit conversion feature in the released products.

D. Enable unit of measure conversions in the product master. Configure the intra-class unit conversion feature in the released products.

SIMULATION -
You are a functional consultant for a company named Contoso Entertainment System USA (USMF).
You plan to trade a product named Professional Speaker Cable in the color gray.
You need to release all the available variants of Professional Speaker Cable in gray.
To complete this task, sign in to Dynamics 365 portal.

HOTSPOT -
You need to order the high-end tires.
What should you set up? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
 

HOTSPOT -
You need to configure the system to support regional sales requirements.
Which group assignments should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
 

Employee1 must set up the new BOM.
Which three actions should Employee1 perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Create a new BOM for Store1, Store2, and Store3.

B. Activate the BOM.

C. Add the raw materials to the BOM and approve the BOM version.

D. Add the raw materials to the BOM and approve it.

E. Create a new BOM for Site1 only.

Your company makes use of a Dynamics 365 Supply Chain Management system.
After implementing warehouse locations, you are tasked with configuring location directives for inventory movement.
You need to make use of a location directive that allows for the identification of similar items in the warehouse.
Which of the following is the strategy you should use?

A. Match packing quantity

B. Location aging FIFO

C. Location aging LIFO

D. Consolidate

You need to reduce the fulfillment team's workload.
Which form should you use?

A. Default order settings

B. Item model group

C. Sales and marketing parameters

D. Released products

E. Product and information management parameters

DRAG DROP -
A company uses Dynamics 365 Supply Chain Management. The company plans to streamline their receiving process for shipments that arrive daily.
You need to set up inbound shipment processing.
In which order should you perform the actions? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Select and Place:
 

HOTSPOT -
You need to define where the tires should be put away in the warehouse.
How should you set up the location directives? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
 

A company uses Dynamics 365 Supply Chain Management.
The company is consistently short on inventory for a group of produced finished good items. This creates customer service issues.
You need to ensure that production orders are automatically created when inventory is low.
Which two actions should you perform? Each answer represents a partial solution.
NOTE: Each correct selection is worth one point.

A. Update the item maximum.

B. Update the item minimum.

C. Set Capable to Promise.

D. Create a safety stock journal.

E. Create a transfer journal.

A company uses Dynamics 365 Supply Chain Management.
The company obtains packaging cartons in metric tons and sells them as individual items. The packaging cartons come in various sizes and are maintained as product variants.
You need to configure unit conversion for the packaging cartons.
What should you do?

A. Enable unit of measure conversions in the product master. Configure the standard unit conversion feature in the Organization administration module.

B. Enable unit of measure conversions in the product master. Configure the inter-class unit conversion feature in the released product.

C. Enable unit of measure conversions in the product master. Configure the standard unit conversion feature in the released products.

D. Enable unit of measure conversions in the product master. Configure the intra-class unit conversion feature in the released product.

You use Dynamics 365 Supply Chain Management to manage inventory.
You need to adjust inventory and override the current item posting setup.
Which journal type should you use?

A. inventory adjustment

B. inventory transfer

C. movement

D. item arrival

You work for a distribution company that makes use of a Dynamics 365 Supply Chain Management system.
You are responsible for planning. When you notice that planned orders for a specific item is increasing, you plan to track the source of the planned orders and release them according to their demand.
You want to make sure that a unique planned purchase order is created by the master planning batch job for each new demand requirement for the item.
You configure the use of the Per period coverage code as the lot-sizing method.
Does the action achieve your objective?

A. Yes, it does

B. No, it does not

SIMULATION -
You are a functional consultant for a company named Contoso Entertainment System USA (USMF).
Sales order number 000754 contains a delivery detail of three ruggedized laser projectors. The customer reports that only two projectors were delivered.
You need to update the packing slip for the sales order.
To complete this task, sign in to Dynamics 365 portal.

A buyer places a purchase requisition for item C0001 from a new vendor.
All purchases from a new vendor must go through an internal workflow approval process.
You need to ensure that a purchase order (PO) is automatically created from the purchase requisition.
Which setup must be in place?

A. Status = approved, item = C0001, vendor populated on the PO

B. Status = in review, item = C0001, vendor populated on the purchase requisition

C. Status = approved, item = C0001, vendor populated on the purchase requisition

D. Status = draft, item = C0001, vendor populated on the PO

HOTSPOT
-
A company is implementing Dynamics 365 Supply Chain Management. The company uses subcontracted services on its bills of material (BOMs).
You must set up and release a subcontractor item so that it can be included on the BOM and subcontractor charges are included in the BOM calculation. Because the subcontractor is a step included in a BOM but not a tangible item, inventory for the item must not be tracked in the warehouse.
You need to set up the subcontractor item and release the item to the company.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
 

DRAG DROP -
You manage a Dynamics 365 Supply Chain Management system for a company.
You need to configure agreements in the system.
Which agreement types should you use? To answer, drag the appropriate agreement types to the appropriate scenarios. Each agreement type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:
 

You need to enable the automatic firming of planned orders from the master planning solution.
Where do you enable the functionality?

A. Lifecycle Services

B. Master planning parameters

C. Feature management workspace

D. On the released item

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company uses Dynamics 365 Supply Chain Management to manage inventory.
Backorders exist on customer sales orders because incorrect data was given on product quantities.
Users need to look up what quantity can be sold and when more product will arrive.
Solution: Ordered shows what quantities are on inbound orders to the warehouse.
Does the solution meet the goal?

A. Yes

B. No

A manufacturing establishment makes use of a Dynamics 365 Supply Chain Management system.
To accelerate setup, they use bill of materials (BOM) templates.
Which of the following is TRUE with regards to template BOMs? (Choose all that apply.)

A. You can only apply a single template BOM to a service object.

B. You can apply many template BOMs to a service object.

C. You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not.

D. You can modify or delete lines in a BOM template as long as the template has not been associated to a service object.