Which three VLAN Tagging modes are available in vSphere 6.x? (Choose three.)

A. External Switch Tagging

B. Private VLAN Tagging

C. Virtual Switch Tagging

D. VXLAN Tagging

E. Virtual Guest Tagging

Refer to the Exhibit. A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit.
 
What is the probable cause of this issue?

A. Another path needs to be used to allow full utilization of the bandwidth.

B. The array is not setup to use the correct multipathing policy.

C. There are no virtual machines on the host.

D. No traffic is being sent across it because a path failed.

A vSphere administrator wants to migrate a virtual machine with vMotion from one node to another in the same cluster, but when the destination server is specified, an error message is displayed.
What might be wrong? (Choose two.)

A. The cluster is configured for EVC and the hosts are of the same processor family

B. The destination host does not have access to the shared datastore

C. The source host is not licensed for vMotion

D. The hosts are licensed for vSphere Essentials Plus

E. The hosts have a dedicated vMotion VMKernel interface configured

Which three actions are available in Troubleshooting Mode in the ESXi Direct Console User Interface (DCUI)? (Choose three.)

A. Enable ESXi Shell.

B. Modify DCUI idle timeout.

C. Modify Password.

D. Restart Management Network.

E. Modify SSH timeout.

A Long-Distance vMotion migration cannot complete.
Which three situations could cause this? (Choose three.)

A. The license currently in use for the two hosts in vSphere Enterprise Edition.

B. The round-trip time between the hosts is greater than 150 milliseconds.

C. The virtual machine is configured to use Virtual NVMe disks.

D. The vMotion traffic to the destination host is on the default TCP/IP stack.

E. The license currently in use for the two hosts is vSphere Enterprise Plus Edition.

What is required to create a vSphere Distributed Switch? (Choose two.)

A. A minimum of two physical uplinks is required.

B. vSphere Enterprise Plus licensing is required.

C. The host is added to a vCenter Server.

D. Login to the ESXi Host with the Root account.

Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.)

A. Single-Initiator

B. Single-Initiator-Single-Target

C. Multiple-Initiators-Single-Target

D. Multiple-Initiators-Multiple-Targets

A vSphere Administrator uses vMotion to migrate a virtual machine between two ESXi hosts and notices that they can no longer ping the VM.
What is the cause?

A. The destination host has an incorrect VLAN tag on the virtual machine port group for the VM

B. The destination host has two port groups with the same VLAN tag

C. The virtual machine has RDMs attached

D. There’s an MTU mismatch

Which three operations occur during a cold migration of a virtual machine? (Choose three.)

A. The virtual machine disks are moved if the datastore is being changed.

B. The virtual machine is registered with the destination server.

C. The source virtual machine is removed from the old hosts.

D. The virtual machine hardware is upgraded.

E. The virtual machine files are quiesced prior to the migration.

Which two options are valid to create vApp in the vSphere Environment? (Choose two.)

A. Login using vSphere WebClient to the vCenter Server, right click on the standalone ESXi host and select Create new vApp.

B. Login using vSphere Host Client to the ESXi host, right click on the host and select Create new vApp.

C. Login using vSphere C# Client to the ESXi host, right click on the host and select Create new vApp.

D. Login using vSphere WebClient to the vCenter Server, right click on the Cluster and select Create new vApp.

Which three traffic types are available services options when configuring a vmkernel port? (Choose three.)

A. Provisioning Traffic

B. Virtual Volumes Traffic

C. vSphere Replication NFC Traffic

D. Virtual SAN Traffic

E. FCoE Traffic

Which password meets the default password requirements in ESXi 6.x?

A. Xqavntthi3

B. xQA!3h

C. xTaMEhb!

D. Xqa_hin3

What two scenarios will prevent extending a VMDK that is attached to a powered on VM? (Choose two.)

A. VMDK has snapshots present.

B. VMDK is connected using LSI logic SAS controller.

C. VMDK is connected using IDE controller.

D. VMDK is running an unsupported Guest OS.

Which three features can be configured during the initial creation of a cluster? (Choose three.)

A. Proactive HA

B. EVC

C. DRS

D. vSAN

A vSphere Administrator notices that sometimes they receive poor network throughput for multiple port groups that reside on a vSwitch with multiple physical uplinks (vmnics). The configuration on the ESXi host is identical to other hosts that are working properly in the same cluster.
What should be done next?

A. Restart Management agents in ESXi Using Direct Console User Interface (DCUI).

B. Add additional port groups to the vSwitch.

C. Alter the failover order of the vmnics until a bad vmnic is found.

D. Add additional resources to the virtual machines that are powered on.

Which two are true about the Risk badge in vRealize Operations? (Choose two.)

A. The Risk badge indicates potential future problems that may degrade the performance of the system.

B. Risks may require attention in the near future.

C. The Risk badge indicates problems that are degrading performance of the system.

D. Risks require attention now to correct system performance problems.

What is the maximum supported RAM per virtual machine (VM) in vSphere 6.5?

A. 6128 GB

B. 2048 GB

C. 8192 GB

D. 4096 GB

An administrator needs to verify that vMotion operations can be performed in a vSphere data center.
What round trip time (RTT) latency is the maximum value that will allow vMotion operations to succeed?

A. 50ms RTT

B. 100ms RTT

C. 150ms RTT

D. 200ms RTT

Which two storage controller configurations can be used with Virtual SAN? (Choose two.)

A. SAS controllers in Passthrough mode

B. SAS controllers in RAID0 mode

C. SAS controllers in RAID1 mode

D. SAS controllers in RAID10 mode AB

Which three actions can be executed when an alarm is triggered? (Choose three.)

A. Send an email.

B. Send an SNMP trap.

C. Run a script or command.

D. Run an Orchestrator workflow.

E. Send a trigger to syslog.

What condition would prevent an administrator from creating a new VMFS3 datastore on an ESXi 6.x host using the vSphere Web Client?

A. A VMFS3 datastore cannot be created on an ESXi 6.x host.

B. The VMFS3 kernel module is not loaded.

C. A VMFS3 datastore cannot be mounted on an ESXi 6.x host.

D. VMFS3 datastores are not compatible with virtual machines created on an ESXi 6.x host.

Which two options can be used for vCenter Server 6.x database availability? (Choose two.)

A. NSX load balancer

B. Microsoft SQL Server 2012/2014 AlwaysOn Availability Groups (AG)

C. vCenter Server Watchdog

D. vCenter Server Heartbeat

E. Microsoft Windows Server Failover Clustering

Which three conditions would prevent Storage I/O Control from being enabled on a group of datastores? (Choose three.)

A. The datastores planned for the solution are used by different vSphere clusters.

B. A datastore planned for the solution is configured as a Raw Device Mapping file.

C. A datastore planned for the solution has three extents.

D. A datastore planned for the solution is configured as NFS.

E. The organization has an Enterprise license.

Which two networking connection types can be configured on a virtual switch? (Choose two.)

A. Virtual machine portgroups

B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network

C. Web services over the Management Network

D. NFS and FCoE storage services

A VM has the following configuration:
✑ 2 vCPU
✑ 4 GB RAM
✑ HDD1 10 GB
✑ HDD2 20 GB
A vSphere Administrator creates a snapshot of a powered off VM.
What is the maximum size of all of the snapshots that can be consumed on the datastore?

A. 30 GB

B. 100% of the datastore minus 512 bytes

C. 34 GB

D. 50% of the datastore

What is a requirement when enabling a Virtual SAN cluster in an existing High Availability (HA) and Distributed Resource Scheduler (DRS) Cluster?

A. Disable DRS and HA before enabling Virtual SAN

B. Enable DRS before enabling Virtual SAN

C. Disable HA before enabling Virtual SAN

D. Enable Storage DRS before enabling Virtual SAN

What is a benefit of using VMware Data Protection (VDP)?

A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.

B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.

C. Provides direct access to VDP configuration integrated into the vSphere Client.

D. Reduces disk space consumed by virtual machine data using deduplication.

What is the default load balancing policy for a newly created VMkernel port on a vSphere Distributed Switch?

A. Route based on originating virtual port ID

B. Route based on IP Hash

C. Route based on source mac address

D. Route based on physical NIC load

After enabling iSCSI port binding on ESXi hosts, a vSphere Administrator can no longer reach an iSCSI Array Target from the configured software iSCSI initiators.
Which can be the root cause for the failure?

A. All VMkernel ports used for iSCSI connectivity reside in the same broadcast domain and IP subnet.

B. LACP other link aggregation was used on the ESXi hosts uplinks to connect to the physical switches.

C. All VMkernel ports used for iSCSI connectivity reside in the same vSwitch.

D. Array Target iSCSI ports reside in the same broadcast domain and IP subnet as the VMkernel ports.

A vSphere Administrator has been tasked with configuring Jumbo Frames and the current environment is based on vSphere Standard Switch.
Which three steps are required?

A. Verify the physical switches in the environment have been properly configured.

B. Configure the Switch MTU.

C. Configure the Port Group MTU.

D. Migrate to a Distributed vSwitch.

E. Configure the Distributed vSwitch MTU.

What three steps must be taken when removing a host from a vSAN-enabled cluster? (Choose three.)

A. Remove disks from diskgroups, remove disk groups.

B. Create at least one vSphere Standard Switch.

C. Remove VMKernel port with vSAN traffic checkbox checked.

D. Remove the host from vSAN cluster.

E. Place the host into maintenance mode with Full Migration option selected.

What are three valid disk configurations for the vSphere Data Protection 6.x Appliance? (Choose three.)

A. 500GB

B. 1TB

C. 1.5TB

D. 2TB

E. 4TB

An administrator is creating a new Virtual SAN cluster on a Layer 2 network. There is an existing Virtual SAN cluster on the same Layer 2 network.
Which two actions would allow the new Virtual SAN cluster to coexist with the older cluster? (Choose two.)

A. Change the default Multicast Address on the new Virtual SAN cluster.

B. Change the default Unicast Address on the new Virtual SAN Cluster.

C. Create a separate VLAN for each cluster.

D. Create an ARP Alias for the Virtual SAN VMkernel Network Adapter.

A vSphere Administrator notices that they cannot login to vCenter Server with the vSphere Web Client, although the server is responding to pings.
What is the next step in troubleshooting the login problem?

A. /etc/init.d/hostd restart

B. connect-viserver-server

C. vim-cmd vmsvc/getallvms

D. service-control –status vmware-vpxd D

An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host.
How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention?

A. Set the shares of the priority virtual machine to High and the rest to Low.

B. Set the shares of the priority virtual machine to High.

C. Set the shares of the priority virtual machine to High and the rest to Normal.

D. Set the shares of the priority virtual machine to Normal and the rest to Low.

What is the VDP appliance available storage configuration maximum?

A. 62 TB

B. 2 TB

C. 4 TB

D. 8 TB

When attempting to access a virtual machine, an administrator is unable to login using the vSphere credentials.
What two options are probable causes of the authentication failure? (Choose two.)

A. The vSphere credentials have not been granted permissions.

B. The vSphere credentials are granted read-only permissions.

C. The vSphere credentials are granted no-access permissions.

D. The vSphere credentials are not a member of the local administrator group.

What are the correct steps to migrate the storage of a virtual machine?

A. Option A

B. Option B

C. Option C

D. Option D

An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle.
Which two files should the administrator analyze to determine the cause of the failure? (Choose two.)

A. ServerutilslogsimsTrace.log

B. Serverutilslogsinstall.txt

C. %TEMP%utilslogsvminst.log

D. %TEMP%vminst.log AD

An administrator configures vSphere Replication for a virtual machine and enables multiple point in time (PIT) instances under the recovery settings in the
Configure Replication wizard.
Which two statements are correct for vSphere Replication with multiple point in time instances enabled? (Choose two.)

A. vSphere Replication retains a number of snapshot instances of the virtual machine on the target site based on the retention policy that you specify.

B. vSphere Replication uses the virtual machine’s snapshot instances to define the target site Point in Time instance based on the retention policy that you specify.

C. vSphere Replication does not support virtual machines with snapshots.

D. vSphere Replication supports virtual machines with snapshots.

A VMware vSphere 6.x Administrator is tasked with configuring vRealize Log Insight.
What three ports can be used for syslog? (Choose three.)

A. 514/UDP

B. 1514/TCP

C. 8443/TCP

D. 514/TCP

E. 123/UDP

You are creating a virtual machine in the Web Client using the New Virtual Machine wizard.
Which two steps are required? (Choose two.)

A. Select a valid name.

B. Select a cluster for the compute resource.

C. Select a network adapter.

D. Select the virtual machine compatibility.

An administrator receives a report that no real time statistics are available for a virtual machine in the vCenter Server inventory.
Which two statements indicate likely causes of the problem? (Choose two.)

A. The virtual machine is powered off.

B. The host containing the virtual machine is disconnected from vCenter Server.

C. There is insufficient real time data to display the information.

D. The vCenter Server service is not running.

An administrator attempts to create a Thick Provisioned Virtual Disk (VMDK) on an NFS datastore; but it fails.
Which two reasons would explain the failure? (Choose two.)

A. Datastore is on an NFS 3 storage server that does not support Hardware Acceleration

B. Datastore is on an NFS 4.1 storage server

C. Only VMFS datastores support “Thick Provisioned” VMDK

D. The NFS datastore was not created on a “Thick Provisioned” device

Which is the VDP appliance available storage configuration maximum?

A. 2 TB

B. 62 TB

C. 8 TB

D. 4 TB

Why are some virtual machines orphaned after rebooting a High Availability (HA) enabled host?

A. The Orphaned virtual machines have HA restart disabled.

B. The Orphaned virtual machines moved recently and the change did not persist.

C. The host is attached to failed storage.

D. The host just came out of maintenance mode.

An administrator is performing a scripted installation of ESXi 6.x.
In which three locations does the script need to be? (Choose three.)

A. PXE Server

B. HTTPS

C. FTP

D. NFS

E. VVOLs Datastore

How are ports scaled on vSphere Standard Switches (vSS)?

A. Ports on a vSS can be dynamically scaled up and down.

B. Ports on a vSS can only be statically scaled up or down.

C. Ports on a vSS can only be dynamically scaled down.

D. Ports on a vSS can only be dynamically scaled up.

Which virtual switch load balancing method should be used when teaming network interfaces with EtherChannel?

A. Route based on originating virtual port.

B. Route based on IP hash.

C. Route based on physical NIC load.

D. Route based on source MAC hash.

E. Use explicit failover order.

Which two options are requirements to perform a migration between vCenter Server instances? (Choose two.)

A. The vCenter Server servers must be time-synchronized.

B. The ESXi hosts must be version 5.5 or later.

C. The vCenter Servers must be version 6.0 or later.

D. The vCenter Server must be in the same single Sign-On domain.

E. The ESXi hosts must have vSphere Standard, Advanced, or Enterprise Plus licensing.