A vSAN policy has been configured with Erasure Coding on a vSAN stretched cluster.
Which RAID level and FTT setting have been specified?

A. SFTT with RAID1

B. PFTT with RAID1

C. PFTT with RAID5/6

D. SFTT with RAID5/6

An administrator is reviewing the root cause analysis of a failure event that resulted in vSAN Data Loss. The following information is known about the event:
1.	The RAID battery-replacing procedure on one of the first vSAN cluster node took much more time than the vSAN administrator predicted.
2.	The only Storage policy has a Primary level of Failures To Tolerate = 1.
3.	Whilst the first host was in maintenance mode, another node failure occurred, causing da-ta loss in the vSAN cluster.
The administrator needs to update the procedure for completing maintenance on the cluster.
Which Maintenance Mode option should the administrator choose to ensure that data loss does not occur in the future?

A. No data migration

B. Ensure accessibility

C. No data migration with selected option ‘Move powered-off and suspended virtual machines to other hosts in the cluster’

D. Full data migration

An architect is working with an All-Flash vSAN configuration and will be using the Flash Caching Devices in vSAN.
Which requirement is specifically needed for these devices?

A. Write endurance

B. IOPS

C. Read endurance

D. Capacity

An architect is tasked with designing a solution that includes the following requirements:
•	The solution must support 5,000 virtual machines.
•	The solution must include software defined storage.
•	The deployment of the solution must be automated.
•	The solution must provide storage-policy based disaster recovery for all workloads.
Which combination of three products will fulfill these requirements? (Choose three.)

A. VMware Site Recovery Manager

B. VMware Cloud Foundation

C. VMware vRealize Automation

D. VMware ESXi

E. VMware vSAN

F. VMware vSphere Replication

A vSAN administrator notices that all the applications on a vSAN cluster are suffering from performance degradation. The main applications on this cluster are very random write-intensive and generate a lot of i/o. De-staging seems to be going awfully slow.
Given the following information:
•	Each host has a single disk group.
•	Each disk group has 7 capacity disks.
•	The size of each cache disk is 600 GB.
How should the administrator solve this problem?

A. Add additional disk groups

B. Add more capacity disks

C. Add more cache disks

D. Increase the size of cache disks

An administrator is setting up vSAN file services on a vSAN cluster but is unable to join the vSAN File Services to the domain.
Which two possible reasons could explain this failure? (Choose two.)

A. A read-only domain controller was being used.

B. The administrator did not pre-create a dedicated organizational unit in Active Directory.

C. The administrator wanted to register the file services to a sub-domain.

D. The administrator was using IP addresses from an IP pool.

E. The administrator was using pre-created computer objects for the file services in the Active Directory.

A capacity upgrade to a production vSAN 7.0 U1 cluster will provide an administrator with a number of SSD storage devices that can be reused in the development vSAN Cluster.
The company security policy mandates the following:
•	All data must be encrypted-at-rest.
•	All data on all drives must be securely erased before being removed and reused.
Which two steps should the administrator take to ensure that all data on the storage devices is securely erased? (Choose two.)

A. When putting the node in maintenance mode, choose the Ensure data accessibility option.

B. Run the Start-VsanWipeDisk PowerCLI command.

C. Turn off vSAN Encryption on the vSAN Cluster.

D. When putting the nodes in maintenance mode, choose the Evacuate all data option.

E. When putting the node in maintenance mode, choose the No data evacuation option.

Which three steps are required to decommission a stretched cluster and convert it to a standard vSAN cluster? (Choose three.)

A. Reinstall the ESXi hosts

B. Remove the Fault Domain configuration

C. Remove the vSAN partition schema on the disk groups

D. Delete the witness host VM

E. Repair the cluster objects

F. Disable and remove the stretched cluster

A company has deployed a 12-node (6-6-1) vSAN 7.0 stretched cluster for all production workloads.
The customer currently uses two different vSAN storage policies for running the workloads depending on the applications requirements:
•	Policy 1 - Site Disaster Tolerance=Dual Site Mirroring, FTT=Erasure Coding
•	Policy 2 - Site Disaster Tolerance=Dual Site Mirroring, FTT=Mirroring
During the setup of the vSAN stretched cluster, the following VM/Host Rules were created:
•	Preferred Site - Preferred Site workloads should run on DC1 hosts.
•	Secondary Site - Secondary Site workloads should run on DC2 hosts.
Which two actions should the administrator take to ensure that there is no impact to production services before completing the maintenance window in the Preferred Site? (Choose two.)

A. Update the Preferred Site vSphere DRS affinity rule to be “Should not run on hosts in group”.

B. Change the Host Groups in the Preferred Site rule to the DC2 hosts.

C. Update the Preferred Site vSphere DRS affinity rule to be “Must run on hosts in group”.

D. Change the Host Groups in the Secondary Site rule to the DC1 hosts.

E. Update the Secondary Site vSphere DRS affinity rule to be “Must run on hosts in group”.

An administrator is tasked with sharing storage from one vSAN cluster to another vSAN cluster. SPBM management must be preserved end-to-end, and the policy must be applied by the source vSAN cluster which is storing the data. Both vSAN clusters are managed by the same vCenter server.
What should the administrator configure?

A. NFS volumes on vSAN

B. iSCSI targets on vSAN

C. HCI Mesh on vSAN

D. vVOLs on vSAN

An 8-Node vSAN Stretched Cluster (4+4+1) with a single disk group has a policy with PFTT=1 (mirrored across sites) and SFTT=1/FTM Mirroring (Local
Protection) configured.
The administrator has been alerted that there is a problem with the cluster. The following has been observed:
✑ The vSAN Witness Host is offline.
✑ Two disk failures on two hosts have occurred in the preferred site.
This has resulted in a critical production virtual machine's vmdk becoming inaccessible.
Which step needs to be performed by the administrator to resolve the issue?

A. Replace all failed disks on the preferred site.

B. Replace the vSAN Witness Host

C. Replace access to the existing vSAN Witness Host

D. Replace only one failed disk on the preferred site.

In a stretched vSAN cluster, how is Read Locality established after fail over to the secondary site?

A. 100% of the reads comes from vSAN hosts on the local site

B. 50% of the reads comes from vSAN hosts on the local site

C. 100% of the reads comes from vSAN hosts on the remote site

D. 50% of the reads comes from vSAN hosts on the remote site

An administrator is tasked with preparing for a Cross vCenter migration in a stretched vSAN cluster where the virtual machines migration will be orchestrated via
VMware Site Recovery Manager.
Which action should the administrator take so the migration is successful?

A. Disable vSAN Deduplication and Compression

B. Reconfigure vCenter HA Admission control

C. Enable vCenter Single Sign-On Enhanced Linked Mode

D. Make sure that Witness traffic is on the management NIC.

During a maintenance action on a vSAN node, a vSAN administrator noticed that the default repair delay time is about to be reached.
Which two commands must be run to extend the time? (Choose two.)

A. /etc/init.d/vsanmgmtd restart

B. esxcli system settings advanced set -o /VSAN/ClomRepairDelay -i 50

C. esxcli system settings advanced set -o /VSAN/ClomRepairDelay -i 80

D. /etc/init.d/clomd restart

E. /etc/init.d/vsanobserver restart

Due to the success of the recently deployed developer-only private cloud solution, a company has a new requirement to at least double the usable capacity in their all-flash vSAN cluster.
The vSAN cluster is deployed into a co-located datacenter that is owned by a third-party hosting company. The hosting company charges a fixed monthly cost for rack space and power consumption. The service owner has been given a limited budget for additional hardware purchases, but not for on-going co-location costs.
The current vSAN cluster has the following configuration:
✑ 10 vSAN Nodes with 2 CPUs (20 cores), 512 GB RAM
✑ 1 Disk Group per vSAN node
- 1 x 400 GB
- 4 x 1.8 TB
✑ De-duplication and Compression is enabled.
✑ vSAN Capacity is currently:
- Total: 72 TB
- Usable: ~40 TB (FTT1/RAID1) and ~60 TB (FTT1/RAID5).
As a result of any action taken, the service owner would like to ensure that overall availability of the vSAN cluster is increased.
Which two recommendations meet the requirement to increase capacity while maintaining service availability? (Choose two.)

A. Install an additional 400 GB SSD and 4 x 1.8 TB SSDs per vSAN node.

B. Update the existing Disk Group, and claim the newly installed drives for each node.

C. Create a new Disk Group, and claim the newly installed cache and capacity SSD drives for each node.

D. Install an additional 3 x 1.8 TB SSDs per vSAN node.

E. Replace existing SSDs with an 800 GB SSD and 4 x 3.8 TB SSDs per vSAN node.

During a design workshop for a stretched vSAN cluster, the requirement that some of the VMs be configured with no-mirror between sites was discussed.
Which three recommendations should the architect provide to address an event of a network partition between two sites? (Choose three.)

A. Host isolation response must exclude the VMs required

B. The default gateway must be used as the only isolation address

C. One of isolation addresses should reside in the site 1 data center

D. VMware vSphere DRS rules to force the VMs to run where the data resides

E. One isolation address reachable only from the witness appliance in both sites

F. One of isolation addresses should reside in the site 2 data center

An administrator is troubleshooting vSAN performance issues, and the performance diagnostics reports:
"There are errors seen in one or more physical NICs on one or more hosts."
Which two problems must be resolved to fix this issue? (Choose two.)

A. A 25 Gb/s NIC needs to be installed.

B. There are incompatible firmware and driver versions.

C. There is an incorrectly set MTU.

D. The vSAN version needs to be upgraded to 7.0.

E. A firewall is blocking ports.

In a vSAN stretched cluster, which value must be set in the vSAN policy if there is no requirement for data mirroring across sites?

A. SFTT = 0

B. SFTT = 1

C. PFTT = 1

D. PFTT = 0

An administrator is tasked with migrating a VMware Horizon View environment that is currently running on an NFS Datastore to VMware vSAN.
Which Horizon configuration option will not be available when configuring vSAN in Horizon View?

A. Instant Clones

B. Linked Clones

C. Storage Tiers

D. Storage Profiles

An administrator of `vsan-prod` cluster noticed the witness components of VMs are flagged as absent after a failed attempt to replace the vSAN Witness Host.
Which action should the administrator take to resolve this issue?

A. Upgrading the vSAN on-disk format

B. Running the vSAN Skyline Health check to ensure there are vSAN Object Health errors and executing the Repair Object Immediately option

C. Using the RVC command: vsan.resync_dashboard ~/computers/vsan-prod

D. Placing the vSAN Witness Host in Maintenance Mode and adding to the vSAN cluster

A customer is planning to deploy a vSAN cluster to host their in-house distributed ERP system. The hardware specifications for their server nodes include:
✑ 2 x Intel Xeon CPU E5-2697 v3 @ 2.60GHz
✑ 1TB memory
Which boot device is supported for the vSAN ESXi nodes for this customer?

A. A 16GB single-level cell (SLC) SATADOM device must be used.

B. A 4GB USB or SD device must be used.

C. A 16GB multiple-level cell (MLC) SATADOM device must be used.

D. ESXi Hosts must boot from a PMEM device.

During a planning session for new vSAN clusters in multiple data centers, the customer relayed the following information:
✑ Highest possible mitigation during a host failure in terms of capacity.
✑ A constraint in this year's IT budget.
What should the architect recommend?

A. Enable operations reserve. A minimum cluster of 3 vSAN nodes.

B. Enable host build reserve. A minimum cluster of 4 vSAN nodes.

C. Enable performance services. A minimum cluster of 6 vSAN nodes.

D. Enable IOInsight Metrics. A minimum cluster of 2 vSAN ROBO nodes.

An administrator is setting up a clustered application and is concerned about the additional space requirements stemming from traditional vSAN storage and Failure to Tolerate (FTT) storage policies. The administrator would like to leverage a vSAN service for this clustered application that would not consume more storage than is actually required.
Which vSAN service should be used to meet this goal?

A. vSAN File services

B. vSAN iSCSI

C. vSAN Compression Only

D. VMware vSAN Direct

An architect is designing a vSAN cluster.
Which storage controller option will yield optimal performance?

A. Hugh queue depth

B. Set caching to 50% read on the controller

C. Enable battery write-back caching

D. RAID 0

During a vSAN design workshop, the customer has provided the following information:
•	There are many development activities that require burst compute and that there is an in-tention to use the existing ESXi hosts.
•	The existing ESXi hosts are not vSAN ready nodes, so they will not be participating in vSAN capacity.
Which three recommendations should the architect make? (Choose three.)

A. Compute-only hosts can have a vSAN VMkernel with same pNIC speed.

B. It is recommended to add hosts with at least a disk controller for cluster expansion.

C. Compute-only hosts can consume from vSAN even if not within the same cluster.

D. Adding identical vSAN nodes for cluster expansion will support an efficient operation.

E. Compute-only hosts must exist in the same vSAN cluster.

F. Compute-only hosts must have a vSAN VMkernel with same pNIC speed.

Administrator deployed VMs with vSAN Stretched Cluster aware storage policy.
Which percentage of read locality will be maintained?

A. 25%

B. 50%

C. 100%

D. 75%

An architect is tasked to design a VMware Horizon Solution with vSAN. The architect needs to use a solution to host the user's profile shares in a highly available manner, and it must be guest OS independent.
Which solution will match these requirements?

A. Cluster out of the box

B. Cluster in a box

C. NFS on vSAN

D. iSCSI on vSAN

An administrator wants to deploy Kubernetes on an end-to-end VMware stack, using VMware vSAN for storage.
Which VMware product should the administrator install as the Kubernetes platform choice?

A. VMware Tanzu Kubernetes Grid

B. VMware Tanzu Data services

C. VMware Tanzu Build service

D. VMware Tanzu Mission Control

An administrator wants to enable encryption on an existing vSAN cluster that already contains virtual machines.
Which additional step should the administrator take to ensure no data is lost during the encryption process?

A. Select ‘Erase disks before use’ check box when enabling encryption on a vSAN cluster.

B. Make vCenter Server trust the KMS, either by trusting the KMS or by uploading a KMS certificate.

C. Ensure that the vSAN Encryption is enabled by default on the existing cluster to encrypt old and new data.

D. Disable vSphere Distributed Resources Schedule (DRS) on the vSAN cluster.

A customer has upgraded to vSAN 7, but there is still an existing legacy host which must be removed from the vSAN cluster.
Which three steps must an administrator take to successfully remove this host from the vSAN cluster? (Choose three.)

A. Place the host in maintenance mode with Ensure Accessibility

B. Disconnect from vCenter Server

C. Place the host in maintenance mode with Full Data migration

D. Place the host in maintenance mode with no data migration

E. Remove from vSAN cluster

F. Delete the disk group(s) on the legacy host

An administrator is tasked with setting up a disaster recovery solution on top of a standard vSAN cluster in the first site and a separate standard vSAN cluster in the secondary site. Costs are a constraint and should be kept to the absolute minimum.
Which solution fits this use case best?

A. VMware vSphere Replication

B. vSAN stretched cluster and VMware vSphere Replication

C. SRM and VMware vSphere Replication

D. Storage replication and SRM

During a vSAN design workshop, the customer expressed the following requirements:
•	The ESXi hosts will have their disk related hardware changed to become vSAN nodes.
•	The default storage policy will be based on an FTT=2 (Failures to Tolerate).
•	The vSAN Primary level of failures to tolerate (PFTT) will be set to a value of 2.
Based on the request, the architect was shown the following information about the current cluster:
•	The number of existing ESXi hosts is 8.
•	vSphere High Availability (HA) Admission control set to 37.5%.
How does this information impact the vSAN cluster design?

A. Secondary level of failures to tolerate must be defined with a value of 2.

B. The current configuration is recommended for the vSAN transformation.

C. The vSphere HA Admission Control must be set to a maximum of 25%.

D. Proactive HA should be enabled on the vSAN cluster.

An architect collected the below technical requirements from the customer during a vSAN cluster design workshop:
✑ Maximize the vSAN datastore usable capacity.
✑ Deduplication and compression are required to help utilize available capacity efficiency.
✑ Ensure the highest level of resiliency wherever possible.
Which disk group configuration should the architect include in the design?

A. One disk group per host, with one cache tier flash disk and four capacity tier flash disks.

B. Two disk groups per host, each with one cache tier flash disk and four capacity tier flash disks.

C. Two disk groups per host, each with one cache tier flash disk and six capacity tier flash disks.

D. Two disk groups per host, each with one cache tier flash disk and six capacity tier magnetic disks.

As a part of a network hardware refresh project, all the network switches have been replaced with a newer, high-performance model. After the replacement, the company users started experiencing slowness on the applications hosted on their vSAN-backed VMs.
The vSAN administrator checked the vSAN Network Health status and noticed that the "Hosts large ping test" has failed.
What could be the cause of this performance degradation issue?

A. MTU 9K is not configured on the hosts vSAN vMKernel ports.

B. MTU 9K is not configured on the hosts VMnic ports.

C. MTU 9K is not configured on the ToR switch.

D. MTU 9K is not configured on the vDS switch.

An administrator notes that the Data-At-Rest Encryption keys have expired.
Which action is needed to resolve this situation?

A. Add a new Standard Key Provider at the vSAN cluster level

B. Generate new encryptions keys at the vSAN cluster level

C. Add an additional KMS at the vCenter server level

D. Generate new encryptions keys at the vCenter server level

An administrator has been tasked with enabling encryption for existing virtual machines on a vSAN cluster.
Which three prerequisites must be satisfied before completing the task? (Choose three.)

A. Create an encryption storage policy

B. Enable Data-In-Transit encryption first

C. Enable that the virtual machines are powered on

D. Verify if a role with privilege ג€Cryptographic operations.Encrypt newג€ is assigned

E. Verify if a role with privilege ג€Cryptographic operations.Migrateג€ is assigned

F. Establish a trusted connection with the KMS

A vSAN administrator noticed that in the case of a preferred site failure in a vSAN stretched cluster, VMs having different restart priorities assigned to them are starting up automatically at almost the same time in the secondary site.
Which two steps should be performed to ensure that the VMware vSphere HA will proceed with the next VM restart priority only when the previous VM group has loaded the operating system? (Choose two.)

A. Change “DRS automation level” to “Partially automated”.

B. Install VMware Tools on all VMs, if not yet installed.

C. Change the “VM dependency restart condition” to “Guest Heartbeats”.

D. Change “VM restart priority condition timeout” to 4 minutes.

E. Change the “VM dependency restart condition” to “Resource allocation”.

Which statement accurately describes the result when proper VM Storage Policy Affinity Rules on a stretched vSAN cluster are set?

A. When a site is disconnected, the VM will lose access to its VMDK.

B. When a site is disconnected, the VM will continue to have access to its VMDK.

C. Bandwidth is unnecessarily sent across the inter-site link.

D. Proper policies result in higher inter-site bandwidth utilization.

An architect is tasked to plan a VMware Horizon environment using vSAN as the primary storage for a vSphere HA-enabled Cluster, but it must consume the least amount of storage possible.
Which vSAN Storage Policy should be used for the Instant Clone VMs?

A. FTT=3

B. FTT=0

C. FTT=1

D. FTT=2

A faulty disk was not cleanly removed from the vSAN cluster when being replaced.
Which action should be taken to resolve the problem and restore the vSAN cluster to a healthy state?

A. Delete and recreate the disk group.

B. Reboot the host to clear the lock.

C. Rescan the SCSI adapter to clear the lock.

D. Ignore the errors, and add the new disk into the disk group.

An architect intends to use the Primary Level of Failures To Tolerate (PFTT) to calculate the minimum number of required hosts for a vSAN cluster.
Which calculation model should be used?

A. 1 * PFTT + 1

B. 2 * PFTT + 2

C. 1 * PFTT + 2

D. 2 * PFTT + 1

An administrator has changed the Virtual Machine Storage Policy from RAID-5 to RAID-6.
How many failures can be tolerated when this change is made?

A. 3

B. 4

C. 2

D. 5

Which description is a valid use case for an administrator to configure an HCI Mesh?

A. Share storage hosted by or on a vSAN cluster, and each client vSAN cluster must mount a maximum of five remote vSAN datastores.

B. Share storage hosted by or on a vSAN cluster that must be applied to different vSAN SPBM policies for different client clusters.

C. Share storage hosted by or on a vSAN cluster to six or more client clusters.

D. Share storage hosted by or on a vSAN cluster to more than 64 hosts, including both local and remote hosts connected.

An architect is reviewing a vSAN cluster that has an unbalanced cluster configuration.
Which behavior will the architect observe?

A. Consistent maintenance procedures

B. Reduced predictability of storage performance

C. Reduced deduplication capabilities

D. Faster rebuild times

During a vSAN design workshop, the infrastructure team highlighted the need to ensure the availability and resiliency of the vSAN network for their production clusters. Each ESXi host is connected to the TOR switches with two 1 GB physical adapters. The physical network fabric is using a spine-leaf architecture.
These subnets are available for the ESXi hosts:
•	Subnet A: 192.168.10.0/24
•	Subnet B: 192.168.20.0/24
Which three strategies can the architect suggest to satisfy these customer requirements? (Choose three.)

A. Configure MTU 9K jumbo frame on the hosts and leaf switches.

B. Configure NIC teaming.

C. Replace the server NICs with 10 GB ones.

D. Add one vSAN VMKernel port to subnet B.

E. Add one vSAN VMKernel port to subnet A.

F. Add two vSAN VMKernel ports to subnet A.

An architect is currently working with a customer to transform their existing ESXi hosts to vSAN nodes. The customer expressed the following requirements.
•	First phase will transform 50% of the hosts to a hybrid vSAN nodes.
•	Second phase will transform the remaining 50% hosts to an All-Flash vSAN nodes.
The following constraint exists:
•	Each host has a 4-port x 1 GbE network interface.
Which two recommendations should the architect make to align with the customer's requirements? (Choose two.)

A. Hybrid vSAN clusters can have shared 1 GbE network adapters.

B. All-Flash vSAN clusters must have dedicated 10 GbE network adapters.

C. Hybrid vSAN clusters must have dedicated 1 GbE network adapters.

D. All-Flash vSAN clusters can have shared 10 GbE network adapters.

E. Hybrid vSAN clusters must have dedicated 10 GbE network adapters.

An administrator has decided to switch the Preferred Fault Domain in a vSAN stretched cluster. Resynchronization activity increased drastically after this change.
Which action should the administrator take next time to avoid this problem?

A. Changing the Data locality setting to None

B. Adding additional hosts to both domains in existing vSAN cluster

C. Adding disks to hosts and creating additional disk groups

D. Putting all hosts from Secondary domain into maintenance mode

A company hosts a vSAN 7 stretched cluster for all development workloads. The original sizing of a maximum of 250 concurrent workloads in the vSAN cluster is no longer sufficient and needs to increase to at least 500 concurrent workloads within the next six months.
To meet this demand, the original 8-node (4-4-1) cluster has recently been expanded to 16 nodes (8-8-1).
Which three additional steps should the administrator take to support the current growth plans while minimizing the amount of resources required at the witness site? (Choose three.)

A. Add the new vSAN witness appliance to vCenter Server.

B. Deploy a new large vSAN witness appliance at the witness site.

C. Configure the vSAN stretched cluster to use the new vSAN witness.

D. Deploy a new extra large vSAN witness appliance at the witness site.

E. Upgrade the vSAN stretched cluster to vSAN 7.0 U1.

F. Configure the new vSAN witness as a shared witness appliance.

An administrator would like to upgrade ten identically configured 2-node vSAN clusters from vSAN 6.7 U3 to vSAN 7.0 U1. Currently, each 2-node vSAN cluster is using a dedicated vSAN witness host appliance. As a result of the upgrade, the administrator would like to leverage the vSAN shared witness feature to reduce the resources being consumed.
In preparation for the first vSAN cluster upgrade, the administrator has completed the following tasks:
1. Upgraded vCenter Server to vCenter Server 7.0 U1.
2. vSphere High Availability (HA) has been disabled on the vSAN Cluster.
3. Upgraded the vSAN witness host appliance to vSphere 7.0 U1.
4. Upgraded both vSAN data nodes to vSphere 7.0 U1.
The key requirement is to ensure that backwards compatibility to the existing version of vSAN is maintained during the upgrade process.
Which three additional steps should the administrator complete to ensure that subsequent clusters can share the same vSAN Witness? (Choose three.)

A. Upgrade the vSAN On-Disk Format (ODF) to version 12.

B. Manually update the vSAN Witness with a vSAN 7 license key.

C. Update the vSAN cluster to use the new vSAN witness host appliance.

D. Configure the existing witness host appliance to act as a shared witness.

E. Deploy a new vSAN 7.0 U1 witness host appliance to act as a shared witness.

F. Upgrade the vSAN On-Disk Format (ODF) to version 13.

A customer is planning to migrate their physical Microsoft SQL Server clustered workloads to vSAN enabled vSphere clusters.
The following requirements must be met:
✑ Each MSSQL cluster is made up of 3 nodes
✑ Highest possible availability against node failures
✑ Some of the vSAN clusters will only consume storage
What should the architect recommend?

A. vSAN iSCSI Target Service

B. Stretched vSAN Cluster

C. vSAN Direct

D. vSAN File Services