300-610 Dump Free

Table of Contents

300-610 Dump Free – 50 Practice Questions to Sharpen Your Exam Readiness.

Looking for a reliable way to prepare for your 300-610 certification? Our 300-610 Dump Free includes 50 exam-style practice questions designed to reflect real test scenarios—helping you study smarter and pass with confidence.

Using an 300-610 dump free set of questions can give you an edge in your exam prep by helping you:

Understand the format and types of questions you’ll face
Pinpoint weak areas and focus your study efforts
Boost your confidence with realistic question practice

Below, you will find 50 free questions from our 300-610 Dump Free collection. These cover key topics and are structured to simulate the difficulty level of the real exam, making them a valuable tool for review or final prep.

Question 1

Refer to the exhibit.

What must be the default gateway of the servers in EPG Web?

A. subnet address of BD1

B. subnet address of L3Out

C. subnet address of BD2

D. NAT appliance

Question 2

An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch? Which two technologies meet this requirement? (Choose two.)

A. HSRP

B. VSS

C. vPC

D. 802.1q

E. FEX

Suggested Answer: BC

Reference:
https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/C07-572835-00_NX-OS_vPC_DG.pdf

Question 3

Which approach splits a pair of clustered fabric interconnects into two standalone devices?

A. Run the disable fips-mode command on each fabric interconnect.

B. Run the connect local-management command on each fabric interconnect.

C. Erase the configuration of both fabric interconnects.

D. Unplug the Layer 1 and Layer 2 interfaces between the devices.

Suggested Answer: D

Question 4

What are two reasons to select OTV as the DCI solution to connect multisite topologies? (Choose two.)

A. It propagates hosts reachability without support of traffic flooding.

B. Layer 3 failures do not propagate beyond the OTV edge device.

C. It extends the spanning tree between data centers.

D. It is an open standard.

E. It constrains HSRP hello messages to each data center.

Suggested Answer: BC

Reference:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/whitepaper/DCI3_OTV_Intro/DCI_1.html

Question 5

DRAG DROP -
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Select and Place:

Suggested Answer:

Reference:
https://www.cisco.com/c/en/us/support/docs/lan-switching/spanning-tree-protocol/10591-77.html

Question 6

An engineer seeks a solution to retrieve routing information from Cisco Nexus switches. The data must be exported to a web application in a JSON or XML data format for monitoring and must be encrypted during transmission. The solution must not require extensive knowledge to support and should be simple to implement.
Which technology accomplishes these goals?

A. streaming telemetry

B. Cisco Tetration

C. NX-API

D. Python scripts

Suggested Answer: A

Question 7

A network engineer is implementing Cisco UCS Manager with Cisco UCS Central integration. The company's strict security policies require that the logical profile of virtual network adapters and logical addressing assigned to Cisco UCS servers be managed by the Cisco UCS Manager. The users must also be prevented from being able to acknowledge pending activities in the Cisco UCS Manager.
Which two profiles must be used to meet these requirements? (Choose two.)

A. global maintenance

B. local service

C. local power

D. restricted chassis

E. public network control

Suggested Answer: BE

Question 8

Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?

A. network speed

B. GPU support

C. storage capacity

D. processor count

Suggested Answer: C

Question 9

Refer to the exhibit.

The security team created a new security policy that requires certain types of traffic to be subject to deep packet inspection. The traffic types are:
• internet traffic to application servers
• internet traffic to corporate users
• partner network traffic to application servers
• partner network traffic to corporate users
Where must the next-generation firewalls be inserted to implement the new policy?

A. inline insertion between the user network switch cluster and the core cluster

B. inline insertion between the edge router cluster and the core switch cluster

C. one-armed insertion from the core switch cluster

D. one-armed insertion from the ACI border leaf cluster

Suggested Answer: B

Question 10

An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?

A. IP redirects

B. flow control

C. proxy ARP

D. HSRP

Suggested Answer: C

Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/lisp/configuration/guide/b_NX-OS_LISP_Configuration_Guide/b_NX-

OS_LISP_Configuration_Guide_chapter_010.html

Question 11

Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?

A. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.

B. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.

C. 8-Gbps links and 10-Gbps links use 8B/10B encoding.

D. 8-Gbps links and 10-Gbps links use 64B/66B encoding.

Suggested Answer: B

Reference:
https://www.iol.unh.edu/sites/default/files/knowledgebase/10gec/10GbE_Cl49.pdf

Question 12

DRAG DROP -
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Select and Place:

Suggested Answer:

Question 13

An engineer must design a Cisco HyperFlex solution to support a virtualized environment in a single data center location. The design must consider these customer requirements:
• a large-scale cluster with eight or more nodes
• distributed high-performance file system for virtualized servers
• high fault tolerance to multiple node failures
Which action meets these objectives?

A. Configure data destaging and deduplication.

B. Implement a replication factor of four.

C. Enable logical availability zones.

D. Create multiple datastores for storage of VM.

Suggested Answer: B

Question 14

An engineer must design a VXLAN EVPN network. The solution should optimize broadcast, unknown unicast, and multicast (BUM) and short BUM replication, and use PIM anycast RP.
Which solution should be included in the design?

A. head-end replication

B. PIM sparse mode

C. PIM dense mode

D. ingress replication

Suggested Answer: D

Question 15

A network engineer must create a Fibre Channel fabric QoS design for an existing data center. The solution must provide relative bandwidth guarantees to application traffic, control latency, and prioritize application traffic.
Which mechanism must be deployed to support these requirements?

A. traffic policing

B. traffic shaping

C. traffic remarking

D. traffic classification

Suggested Answer: B

Question 16

A network engineer needs to design a highly available data center to meet these requirements:
• ensure network resilience
• reduce network instability for Layer 3 gateway devices
• provide interoperability in multivendor environments
• support IPv4 and IPv6 address families
Which FHRP meets these requirements?

A. HSRP

B. HSRPv2

C. VRRPv3

D. VRRP

Suggested Answer: D

Question 17

A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications.
Which action should be implemented for the Fibre Channel traffic from the vHBA of this server to pass through the I/O Module in the Cisco UCS chassis to a specified uplink Fibre Channel port?

A. Update the applied global QoS policy.

B. Update the applied Fibre Channel adapter policy.

C. Enable Persistent Binding in the vHBA policy.

D. Include a SAN pin group in the vHBA policy.

Suggested Answer: B

Question 18

A network architect designs the iSCSI architecture. The requirements are to achieve high performance and a low amount of oversubscription and to minimize latency. Which two actions must be taken to meet these requirements? (Choose two.)

A. Use a software-based iSCSI adapter on the client side.

B. Enable iSCSI port binding on the initiator device.

C. Configure the size of the payload in each frame to MTU 9000.

D. Set the size of the payload in each frame to MTU 1500.

E. Minimize the number of hops between the storage and the hosts.

Suggested Answer: AC

Question 19

Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?

A. VSS that has unified uplinks

B. Ethernet and unified ports on the same port channel

C. vPC that has unified uplinks

D. cross-connections with pinning

Suggested Answer: C

Reference:
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188-configure-fcoe-00.html#anc11

Question 20

A cloud provider deploys an infrastructure based on Cisco ACI Fabric, Cisco UCS, and Cisco HyperFlex Data Platform. The storage area network will be based on Cisco MDS 9000 Series Switches with Hyper-V, VMware, and KVM used as the virtualization platform. The requirement is to deploy the overall solution by using a robust automation and orchestration tool.
Which tool meets these requirements?

A. Cisco Prime Infrastructure

B. Cisco Network Assurance

C. Cisco UCS Director

D. Cisco Cloud Center

Suggested Answer: C

Question 21

Which two features are provided by deploying an OOB management network in a Cisco Nexus data center? (Choose two.)

A. Layer 3 path for monitoring purposes

B. Layer 2 path for server traffic

C. Layer 2 path for a vPC peer link

D. Layer 3 path for vPC keepalive packets

E. Layer 3 path for server traffic

Suggested Answer: BC

Reference:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Aug2014/CVD-DataCenterDesignGuide-AUG14.pdf

Question 22

DRAG DROP -
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Select and Place:

Suggested Answer:

Reference:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/whitepaper_c11-701962.html

Question 23

Which two configurations allow for routing traffic between two VDCs? (Choose two.)

A. Connect the VDCs to an external Layer 3 device.

B. Cross-connect the ports between the VDCs.

C. Create VRF-aware software infrastructure interfaces.

D. Create a policy map in the default VDC that routes traffic between the VDCs.

E. Create interfaces in the VDC that can be accessed by another VDC.

Suggested Answer: AD

Question 24

What influences the number of ISLs that are required between Cisco MDS Series switches?

A. FCoE protocol

B. type of storage

C. end-to-end oversubscription ratio

D. N Port virtualization

Suggested Answer: C

Reference:
https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-series-multilayer-directors/white-paper-c11-729697.html

Question 25

An engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including Cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure.
Which tool meets these requirements?

A. Cisco Tetration

B. Cisco Data Center Network Manager

C. Cisco UCS Director

D. Cisco Intersight

Suggested Answer: D

Question 26

A network engineer must select a high availability feature for their data center. The solution must ensure network resilience, reduce network instability for Layer 3 routing protocols, and meet these requirements:
• The device must notify its neighbors when the control plane is undergoing a restart.
• The solution must suppress routing flaps in case of stateful switchovers.
Which solution must be implemented?

A. BFD

B. HSRP

C. NSF

D. ISSU

Suggested Answer: C

Question 27

A company has added a new FCoE storage array to increase the performance of datastore access for end users. This storage array is directly connected to the Cisco Nexus 5672UP switches using four 10G port-channel interfaces. After deployment, the end users fail to access the datastore compared to the older solution. A network engineer verified the port-channel interface and finds that the congestion occurs when PFC frames are generated at the FCoE ingress interface. Which action must be taken to resolve the congestion issue?

A. Reserve bandwidth for FCoE VLAN on the port-channel interface connected with storage.

B. Enable the FCoE class in QoS on Cisco Nexus 5672UP switches.

C. Increase the queuing buffer in the port-channel interface connected to the storage array.

D. Add an additional FCoE VLAN to the SAN network.

Suggested Answer: C

Question 28

A network engineer must design a data center network with four Cisco Nexus 7706 switches. The switches will be installed in primary and secondary data centers in vPC domains. The two data centers must be connected via Layer 2 links and provide the maximum throughput, redundancy, and avoid port-blocking spanning-tree design.
Which deployment model meets these requirements?

A. dual-sided single vPC

B. single-sided dual vPC

C. dual-sided dual vPC

D. single-sided single vPC

Suggested Answer: C

Question 29

DRAG DROP -
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Select and Place:

Suggested Answer:

Question 30

An engineer must design the compute portion of a data center environment. The environment includes:
• direct-attach Fibre Channel storage array with four 32 G Fibre Channel ports per controller
• Cisco UCS B-series servers equipped with Cisco UCS IOM 2408 Fabric Extenders
• Cisco 6454 Fabric Interconnects
The fabric interconnects connect to the LAN via 100G ports, the SAN via 32 G Fibre Channel ports, and the IOM 2408 via 10 G ports. Which storage connectivity strategy must the engineer choose?

A. UCS: Qty four 802.1q trunks from each IOM to each fabric interconnectStorage: Qty two Fibre Channel links from each SAN controller to each fabric interconnect

B. UCS: four-port back-to-back PortChannel between IOM and fabric interconnectStorage: two-port SAN-PortChannel from each SAN controller to each fabric interconnect

C. UCS: two-port PortChannel from each IOM to each fabric interconnectStorage: Qty four Fibre Channel links from each SAN controller to each fabric interconnect

D. UCS: four-port PortChannel from each IOM to each fabric interconnectStorage: four-port SAN-PortChannel from each SAN controller to each fabric interconnect

Suggested Answer: D

Question 31

Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)

A. WWPN

B. EUI

C. IQN

D. WWN

E. OUI

Suggested Answer: CD

Reference:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/cli_3_3_1/ciscsi.html

Question 32

Which two automation requirements are met when Puppet is used? (Choose two.)

A. Enable clients to pull changes without installing an agent.

B. Enable clients to pull changes to configuration files.

C. Enable one-off infrastructure changes to be performed manually.

D. Immediately push configuration updates to servers.

E. Provide support for writing new modules in Python.

Suggested Answer: AD

Question 33

Which authentication software natively runs within the CLI of Cisco NX-OS devices?

A. Python

B. Ansible

C. Puppet

D. Chef

Suggested Answer: B

Question 34

An engineer must secure the payload traversing across the DCI. The solution must support confidentiality and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used.
Which technology must be used to support these requirements?

A. GRE

B. OTV

C. MACsec

D. IPsec

Suggested Answer: C

Question 35

A network design must include a solution to run CLI commands remotely on Cisco Nexus 9000 Series Switches. The customer's security policy requires secure login credentials and an encrypted underlying transport. The command output will be processed rising tools that support XML or JSON encoding.
Which two components should be included in the design? (Choose two.)

A. NX-API

B. HTTPS

C. HTTP

D. Bash shell

E. SSH

Suggested Answer: AB

Question 36

Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

A. Cisco UCS Manager creates two separate fabric port channels.

B. Cisco UCS Manager creates a single fabric port channel.

C. The port channel is disabled until an administrator enables it manually.

D. Each uplink that connects an IOM is configured as a discrete link.

Suggested Answer: A

Question 37

Refer to the exhibit.

Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?

A. Secondary

B. Initial

C. Updating

D. Primary

Suggested Answer: B

Question 38

A network consultant reviews the requirements for the Storage Area Network (SAN) design. The proposed solution must offer a very efficient port usage and eliminate the need for a separate physical layer of switches and their associated ISLs. The design is not expected to require future expansion.
Which SAN topology must be used to meet these requirements?

A. core-edge

B. collapsed-core

C. core-distribution-access

D. edge-core-edge

Suggested Answer: B

Question 39

An engineer is implementing management access to a Cisco Nexus platform. The customer requires a solution that provides isolation between the data and control planes, in addition to management that uses encryption and authentication. The customer will manage the device using both IPv4 and IPv6.
Which two components should be used to meet these requirements? (Choose two.)

A. mgmt0 interface

B. SSH protocol

C. SNMP

D. SVI interface

E. Telnet protocol

Suggested Answer: BC

Question 40

DRAG DROP -
Drag the requirements from the left onto the correct policy types on the right.
Select and Place:

Suggested Answer:

Question 41

Refer to the exhibit.

An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)

A. SAN Pin Groups on the Cisco UCS Fabric Interconnects.

B. NPV feature on the Cisco MDS Series.

C. end-host mode feature on the Cisco UCS Fabric Interconnects

D. NPIV feature on the Cisco MDS Series

E. Smart Zoning feature on the Cisco UCS Fabric Interconnects

Suggested Answer: BD

Question 42

A storage administrator receives reports of network delays when database software attempts to access the storage array. The virtual machines that host the database software are installed on different rack servers connected to the Cisco UCS Fabric Interconnect domain. The existing SAN switches are connected to the Fabric Interconnects using two 8 Gb port-channel interfaces to connect the storage array. The storage administrator has decided to deploy iSCSI storage with four 10 Gbps interfaces connected to the Cisco UCS Fabric Interconnects.
Which deployment type resolves the problems with storage contention?

A. iSCSI storage with Cisco UCS Fabric Interconnect in the virtual port-channel mode

B. iSCSI storage with Cisco UCS Fabric Interconnect using an appliance port

C. iSCSI storage appliance on Cisco UCS Fabric Interconnect uplink trunk port

D. iSCSI storage appliance on Cisco UCS Fabric Interconnect in the storage end-host mode

Suggested Answer: C

Question 43

Refer to the exhibit.

A company plans to implement high availability between the iSCSI host and the Fibre Channel target. Which solution must the company implement to recover from a failure of a host NIC, MDS IP storage port, or Fibre Channel target port?

A. Configure FCoE between the host NICs and MDS ports.

B. Set up IP storage ports to export the two Fibre Channel target ports.

C. Implement HSRP on the MDS IP storage ports.

D. Map the Fibre Channel target ports to one IP storage port.

Suggested Answer: B

Question 44

Which two automation requirements can be met by using Puppet? (Choose two.)

A. Push configuration updates immediately to servers.

B. Enable clients to pull changes to configuration files.

C. Enable clients to pull changes without installing an agent.

D. Provide support for writing new modules in Python.

E. Enable one-off infrastructure changes to be performed manually.

Suggested Answer: AB

Reference:
https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/whitepaper_c11-740103.pdf

Question 45

Refer to the exhibit.

A cloud service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a Layer 2 topology to communicate with each other.
Which Cisco ACI topology design meets these requirements?

A. Multi-Cloud

B. Multi-Site

C. Multi-Pod over OSPF EVPN

D. Multi-Pod over MP-BGP EVPN

Suggested Answer: D

Question 46

A network engineer must perform a VMM integration for the VMWare vCenter platform with the Cisco ACI Fabric. The vCenter is already installed in one of the rack servers connected to ACI leaf switches in a vPC mode. Which type of management network must be used to integrate vCenter with ACI?

A. in-band management

B. APIC infra

C. out-of-band management

D. VLAN infra

Suggested Answer: C

Question 47

An engineer is expanding an existing iSCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used:
{prefix}.2019-01.com.acme123:00.ffd0cb21.bcb392817521
Which addressing scheme was used in the environment?

A. Network Address Authority

B. Extended Unique Identifier

C. iSCSI Qualified Name

D. Fibre Channel ID

Suggested Answer: B

Question 48

A network engineer is designing a Cisco Hyperflex infrastructure. The infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.
Which storage connectivity method must be used to meet these requirements?

A. Fibre Channel over Ethernet

B. Internet Small Computer Systems Interface

C. raw device mapping

D. server message block

Suggested Answer: A

Question 49

What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?

A. vPC+

B. E-Trunk

C. SAN port channel

D. LACP port channel

Suggested Answer: D

Question 50

Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?

A. NPIV mode

B. FC end-host mode

C. NPV mode

D. FC switching mode

Suggested Answer: D

Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Storage-Mgmt/3-1/
b_UCSM_GUI_Storage_Management_Guide_3_1/b_UCSM_GUI_Storage_Management_Guide_3_1_chapter_01110.html

Access Full 300-610 Dump Free

Looking for even more practice questions? Click here to access the complete 300-610 Dump Free collection, offering hundreds of questions across all exam objectives.

We regularly update our content to ensure accuracy and relevance—so be sure to check back for new material.

Begin your certification journey today with our 300-610 dump free questions — and get one step closer to exam success!