What are three valid disk configurations for the vSphere Data Protection 6.x Appliance? (Choose three.)

A. 500GB

B. 1TB

C. 1.5TB

D. 2TB

E. 4TB

Which two storage controller configurations can be used with Virtual SAN? (Choose two.)

A. SAS controllers in Passthrough mode

B. SAS controllers in RAID0 mode

C. SAS controllers in RAID1 mode

D. SAS controllers in RAID10 mode AB

What is a requirement when enabling a Virtual SAN cluster in an existing High Availability (HA) and Distributed Resource Scheduler (DRS) Cluster?

A. Disable DRS and HA before enabling Virtual SAN

B. Enable DRS before enabling Virtual SAN

C. Disable HA before enabling Virtual SAN

D. Enable Storage DRS before enabling Virtual SAN

A vSphere Administrator notices that sometimes they receive poor network throughput for multiple port groups that reside on a vSwitch with multiple physical uplinks (vmnics). The configuration on the ESXi host is identical to other hosts that are working properly in the same cluster.
What should be done next?

A. Restart Management agents in ESXi Using Direct Console User Interface (DCUI).

B. Add additional port groups to the vSwitch.

C. Alter the failover order of the vmnics until a bad vmnic is found.

D. Add additional resources to the virtual machines that are powered on.

Which three conditions would prevent Storage I/O Control from being enabled on a group of datastores? (Choose three.)

A. The datastores planned for the solution are used by different vSphere clusters.

B. A datastore planned for the solution is configured as a Raw Device Mapping file.

C. A datastore planned for the solution has three extents.

D. A datastore planned for the solution is configured as NFS.

E. The organization has an Enterprise license.

Which two networking connection types can be configured on a virtual switch? (Choose two.)

A. Virtual machine portgroups

B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network

C. Web services over the Management Network

D. NFS and FCoE storage services

Which two allow for the disabling of Network Rollback operations? (Choose two.)

A. Modifying the vpxd advanded configuration options and adding the config.vpxd.network.rollback key

B. Modifying the C:ProgramDataVMwareCIScfgvmware-vpxvpxd.cfg file and adjusting the xml tag

C. Modifying the C:ProgramDataVMwareCIScfgvmware-vpxvpxd.cfg file and adjusting the xml tag

D. Modifying the C:ProgramDataVMwareCIScfgvmware-vpxfirstbootvpxd-service- spec.prop file and adjusting the xml tag

What is the maximum supported RAM per virtual machine (VM) in vSphere 6.5?

A. 6128 GB

B. 2048 GB

C. 8192 GB

D. 4096 GB

Refer to the Exhibit. An administrator has created the resource pool configuration shown in the Exhibit.
 
Based on the exhibit, which virtual machine(s) can be successfully powered on?

A. VM-M1 only

B. VM-K1 only

C. VM-K1 and VM-K2 only

D. VM-K1, VM-K2, and VM-M1

One of your virtual machines (VM) has performance issues and sometimes in unresponsive.
Which VM file must be checked in order to find the root cause?

A. vpxd.log

B. ds.log

C. vminst.log

D. vmware.log

What is the optimal configuration when building a virtual machine for a single-threaded Windows application?

A. Deploy single-threaded applications on uniprocessor virtual machines.

B. Deploy single-threaded applications on symmetric multi-processor virtual machines.

C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.

D. Tune Single-threaded applications at the hypervisor level.

You need to add an object to an existing vApp using the vSphere Web Client. How is this accomplished?

A. Create an Object Inside the vApp.

B. Add an Object to a vApp.

C. Add an Object to the Datastore the vApp is located in.

D. Move all Objects to a new Datastore folder.

Refer to the Exhibit. A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit.
 
What is the probable cause of this issue?

A. Another path needs to be used to allow full utilization of the bandwidth.

B. The array is not setup to use the correct multipathing policy.

C. There are no virtual machines on the host.

D. No traffic is being sent across it because a path failed.

An administrator configures vSphere Replication for a virtual machine and enables multiple point in time (PIT) instances under the recovery settings in the
Configure Replication wizard.
Which two statements are correct for vSphere Replication with multiple point in time instances enabled? (Choose two.)

A. vSphere Replication retains a number of snapshot instances of the virtual machine on the target site based on the retention policy that you specify.

B. vSphere Replication uses the virtual machine’s snapshot instances to define the target site Point in Time instance based on the retention policy that you specify.

C. vSphere Replication does not support virtual machines with snapshots.

D. vSphere Replication supports virtual machines with snapshots.

When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected?

A. 1 min

B. 5 min

C. 10 min

D. 15min

Which vSphere 6.x storage service provides array-based operations at the virtual disk level?

A. Local storage

B. Virtual Volumes

C. Virtual SAN

D. Datastores

Why are some virtual machines orphaned after rebooting a High Availability (HA) enabled host?

A. The Orphaned virtual machines have HA restart disabled.

B. The Orphaned virtual machines moved recently and the change did not persist.

C. The host is attached to failed storage.

D. The host just came out of maintenance mode.

An administrator is configuring the Failover Order option on a vSphere Distributed Switch.
Which two options should be used with IP-hash load balancing? (Choose two.)

A. Active Uplinks

B. Standby Uplinks

C. Unused Uplinks

D. Override Failover Order

Which three features can be configured during the initial creation of a cluster? (Choose three.)

A. Proactive HA

B. EVC

C. DRS

D. vSAN

An administrator is performing an interactive installation of ESXi 6.x.
Which three options are available for installation? (Choose three.)

A. DVD

B. USB

C. PXE

D. Scripted

E. Auto Deploy

What two scenarios will prevent extending a VMDK that is attached to a powered on VM? (Choose two.)

A. VMDK has snapshots present.

B. VMDK is connected using LSI logic SAS controller.

C. VMDK is connected using IDE controller.

D. VMDK is running an unsupported Guest OS.

An administrator receives a report that no real time statistics are available for a virtual machine in the vCenter Server inventory.
Which two statements indicate likely causes of the problem? (Choose two.)

A. The virtual machine is powered off.

B. The host containing the virtual machine is disconnected from vCenter Server.

C. There is insufficient real time data to display the information.

D. The vCenter Server service is not running.

When managing search queries in vRealize Log Insight, what three actions can be performed? (Choose three.)

A. Share the Current Query

B. Load a Query

C. Take a Snapshot of a Query

D. Pause the Current Query

E. Duplicate a Query

A VMware vSphere 6.x Administrator is creating an Alarm Action.
What are three configurable actions? (Choose three.)

A. Shutdown Guest

B. Restart Guest

C. Send a notification email

D. Migrate VM

E. Run a command

What information is required as part of an interactive ESXi 6.x installation?

A. Keyboard layout

B. IP Address

C. Root password

D. DNS information

A vApp template recently added to a Content Library is not displayed.
Which two actions could correct this problem? (Choose two.)

A. Manually synchronize the library

B. Select the Download all library content immediately option

C. Select the Sync subscribed library option

D. Manually download the vApp template

Which three traffic types are available services options when configuring a vmkernel port? (Choose three.)

A. Provisioning Traffic

B. Virtual Volumes Traffic

C. vSphere Replication NFC Traffic

D. Virtual SAN Traffic

E. FCoE Traffic

Which three operations occur during a cold migration of a virtual machine? (Choose three.)

A. The virtual machine disks are moved if the datastore is being changed.

B. The virtual machine is registered with the destination server.

C. The source virtual machine is removed from the old hosts.

D. The virtual machine hardware is upgraded.

E. The virtual machine files are quiesced prior to the migration.

A VM has the following configuration:
✑ 2 vCPU
✑ 4 GB RAM
✑ HDD1 10 GB
✑ HDD2 20 GB
A vSphere Administrator creates a snapshot of a powered off VM.
What is the maximum size of all of the snapshots that can be consumed on the datastore?

A. 30 GB

B. 100% of the datastore minus 512 bytes

C. 34 GB

D. 50% of the datastore

An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle.
Which two files should the administrator analyze to determine the cause of the failure? (Choose two.)

A. ServerutilslogsimsTrace.log

B. Serverutilslogsinstall.txt

C. %TEMP%utilslogsvminst.log

D. %TEMP%vminst.log AD

Which two statements are true about VMFS5 datastores on ESXi 6.x? (Choose two.)

A. Virtual Disk (VMDK) size can be larger than 2TB.

B. Datastore extent size can be larger than 2TB.

C. Only Physical Mode Raw Device Map (Passthrough-RDM) can be larger than 2TB.

D. 2MB block size is required to support larger than 2TB file size. AB

Which option was added to the load balancing calculations of DRS in vSphere 6.5?

A. Network

B. Memory

C. Storage

D. CPU

A company has decided to implement Virtual SAN within their vSphere 6.x environment.
The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual SAN Ready Node list.
Each ESXi host includes:
✑ Two SAS Controllers that support Passthrough Mode
✑ Four Solid State Drives (SSDs) 1TB in size each
✑ 20 SAS Magnetic Disks (MDs) 1TB in size each
✑ The SSDs and MDs are evenly split between the two SAS controllers
The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode.
Which two Disk Group configurations would meet the stated configuration requirements? (Choose two.)

A. 4 disk groups with 1 SSD and 5 MDs each

B. 2 disk groups with 1 SSD and 7 MDs each

C. 2 disk groups with 2 SSDs and 7 MDs each

D. 2 disk groups with 1 SSD and 10 MDs each

Which three actions can be executed when an alarm is triggered? (Choose three.)

A. Send an email.

B. Send an SNMP trap.

C. Run a script or command.

D. Run an Orchestrator workflow.

E. Send a trigger to syslog.

What is the default load balancing policy for a newly created VMkernel port on a vSphere Distributed Switch?

A. Route based on originating virtual port ID

B. Route based on IP Hash

C. Route based on source mac address

D. Route based on physical NIC load

What is a benefit of using VMware Data Protection (VDP)?

A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.

B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.

C. Provides direct access to VDP configuration integrated into the vSphere Client.

D. Reduces disk space consumed by virtual machine data using deduplication.

Which two actions are required when enabling vFlash Read Cache for a virtual machine's virtual disk? (Choose two.)

A. A value in the Virtual Flash Read Cache text box must be entered.

B. A Flash Resource Pool for Cache size reservation must be entered.

C. The Device backing and the block size must be configured.

D. The Enable virtual flash host swap cache check box must be selected.

After enabling iSCSI port binding on ESXi hosts, a vSphere Administrator can no longer reach an iSCSI Array Target from the configured software iSCSI initiators.
Which can be the root cause for the failure?

A. All VMkernel ports used for iSCSI connectivity reside in the same broadcast domain and IP subnet.

B. LACP other link aggregation was used on the ESXi hosts uplinks to connect to the physical switches.

C. All VMkernel ports used for iSCSI connectivity reside in the same vSwitch.

D. Array Target iSCSI ports reside in the same broadcast domain and IP subnet as the VMkernel ports.

By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?

A. RedHat Certificate Authority

B. VMware Certificate Authority

C. DigiCert Certificate Authority

D. Verisign Certificate Authority

A VMware vSphere 6.x Administrator sees the following output in esxtop:
 
What does the %RDY column represent?

A. CPU Cycle Wait Percentage

B. CPU Utilization

C. CPU Ready

D. Idle CPU Percentage

How are ports scaled on vSphere Standard Switches (vSS)?

A. Ports on a vSS can be dynamically scaled up and down.

B. Ports on a vSS can only be statically scaled up or down.

C. Ports on a vSS can only be dynamically scaled down.

D. Ports on a vSS can only be dynamically scaled up.

A Primary Fault Tolerant VM is performing poorly despite its ESXi host having adequate resources and CPUs are idle. Other hosts in the cluster are much more heavily utilized.
What is the cause?

A. The Secondary VM is assigned to a different portgroup than the Primary.

B. The Secondary VM is running more applications than the Primary.

C. The Secondary VM is running on an ESXi host that is overcommitted.

D. The vMotion network has not been configured for Jumbo Frames.

An administrator has been tasked with enabling High Availability (HA) on a cluster in a vSphere 6.x environment with default settings. The cluster configures properly and there are no errors.
The next day when powering on a virtual machine, an error is presented:
Not Enough Failover Resources -
Which three scenarios are likely causes of this error message? (Choose three.)

A. The default VM Monitoring Sensitivity is set too high.

B. There are not enough datastore heartbeat datastores configured by default.

C. The default slot size in the cluster is set too high.

D. There are virtual machines with large CPU reservations.

E. A host is in maintenance mode for a replacement of a failed Hard Drive.

An administrator is creating a new Virtual SAN cluster on a Layer 2 network. There is an existing Virtual SAN cluster on the same Layer 2 network.
Which two actions would allow the new Virtual SAN cluster to coexist with the older cluster? (Choose two.)

A. Change the default Multicast Address on the new Virtual SAN cluster.

B. Change the default Unicast Address on the new Virtual SAN Cluster.

C. Create a separate VLAN for each cluster.

D. Create an ARP Alias for the Virtual SAN VMkernel Network Adapter.

A VMware vSphere 6.x Administrator is tasked with expanding a current vRealize Log Insight Deployment.
What two steps will accomplish this task? (Choose two.)

A. Run the startup wizard and select Join Existing Deployment.

B. Login to the vRealize Log Insight Management UI and select Add New Node.

C. Deploy another vRealize Log Insight server from the OVF.

D. Deploy and install vRealize Log Insight on a new Linux virtual machine.

Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.)

A. Single-Initiator

B. Single-Initiator-Single-Target

C. Multiple-Initiators-Single-Target

D. Multiple-Initiators-Multiple-Targets

What three steps must be taken when removing a host from a vSAN-enabled cluster? (Choose three.)

A. Remove disks from diskgroups, remove disk groups.

B. Create at least one vSphere Standard Switch.

C. Remove VMKernel port with vSAN traffic checkbox checked.

D. Remove the host from vSAN cluster.

E. Place the host into maintenance mode with Full Migration option selected.

A VMware vSphere 6.x Administrator is tasked with configuring vRealize Log Insight.
What three ports can be used for syslog? (Choose three.)

A. 514/UDP

B. 1514/TCP

C. 8443/TCP

D. 514/TCP

E. 123/UDP

An administrator is installing vCenter Server for an environment that has 40 ESXi 6.x Hosts and 150 virtual machines.
Which database would meet the minimal requirements needed for this task?

A. vFabric Postgres

B. Microsoft SQL Express 2008

C. Microsoft SQL Server 2014

D. Oracle 11g

A vSphere Administrator sees the alarm:
vSphere HA virtual machine failed to failover
This occurred for a number of virtual machines on a particular ESXi host in a cluster with vSphere High Availability (HA) enabled. The virtual machines guest operating systems never reported a power event.
What happened?

A. The virtual machines were vMotioned off of the ESXi host.

B. The ESXi host is still running but has disconnected from the network.

C. The ESXi host failed and vSphere HA successfully failed over the virtual machines.

D. The previous virtual machine cloning operations failed to complete.