Which two statements are true about VMFS5 datastores on ESXi 6.x? (Choose two.)

A. Virtual Disk (VMDK) size can be larger than 2TB.

B. Datastore extent size can be larger than 2TB.

C. Only Physical Mode Raw Device Map (Passthrough-RDM) can be larger than 2TB.

D. 2MB block size is required to support larger than 2TB file size. AB

Which database is supported for the vCenter Server Appliance 6.5?

A. PostgreSQL

B. Oracle

C. Microsoft SQL Server

D. DB2

What three types of host bus adapters are supported for connecting to shared storage on an ESXi hosts? (Choose three.)

A. Software SATA

B. Software iSCSI

C. Hardware HBA

D. Software FCoE

A vSphere Administrator has been tasked with configuring Jumbo Frames and the current environment is based on vSphere Standard Switch.
Which three steps are required?

A. Verify the physical switches in the environment have been properly configured.

B. Configure the Switch MTU.

C. Configure the Port Group MTU.

D. Migrate to a Distributed vSwitch.

E. Configure the Distributed vSwitch MTU.

How are ports scaled on vSphere Standard Switches (vSS)?

A. Ports on a vSS can be dynamically scaled up and down.

B. Ports on a vSS can only be statically scaled up or down.

C. Ports on a vSS can only be dynamically scaled down.

D. Ports on a vSS can only be dynamically scaled up.

Which three VLAN Tagging modes are available in vSphere 6.x? (Choose three.)

A. External Switch Tagging

B. Private VLAN Tagging

C. Virtual Switch Tagging

D. VXLAN Tagging

E. Virtual Guest Tagging

Which three traffic types are available services options when configuring a vmkernel port? (Choose three.)

A. Provisioning Traffic

B. Virtual Volumes Traffic

C. vSphere Replication NFC Traffic

D. Virtual SAN Traffic

E. FCoE Traffic

An administrator needs to verify that vMotion operations can be performed in a vSphere data center.
What round trip time (RTT) latency is the maximum value that will allow vMotion operations to succeed?

A. 50ms RTT

B. 100ms RTT

C. 150ms RTT

D. 200ms RTT

What are three goals of resource management within a cluster? (Choose three.)

A. To prevent virtual machines from monopolizing resources and to guarantee predictable service rates.

B. To exploit undercommitted resources and overcommit with graceful degradation.

C. To provide solutions to potential problems that you might encounter when using vCenter Server.

D. To control the relative importance of virtual machines and provide flexible dynamic partitioning.

E. To provide additional network administration capabilities.

A VMware vSphere Administrator is tasked with enabling Fault Tolerance (FT) on a VM but is unable to.
What is the reason that FT cannot be enabled?

A. The VM has a VMDK that is greater than 2TB.

B. The VM is configured to use Jumbo Frames.

C. The VM has 4 vCPU.

D. The VM is running an operating system that is more than 4 years old.

A vSphere Administrator recently upgraded to vSphere .6.5 and wants to assign more than 4 TB of RAM to the virtual machine.
What must happen first?

A. Make sure that the user account has administrative privileges at a global level.

B. Upgrade the Virtual Machine compatibility to version 13.

C. Obtain an ESXi server with an Intel Skylake CPU.

D. Make sure that there are no snapshots present on the virtual machine. B

Which two choices would make a Virtual Machine compatible when enabling Fault Tolerance? (Choose two.)

A. e1000e virtual network adapter

B. 2 TB + VMDK

C. 4 Virtual CPUs (vCPU)

D. NIC passthrough

An administrator has been tasked with enabling High Availability (HA) on a cluster in a vSphere 6.x environment with default settings. The cluster configures properly and there are no errors.
The next day when powering on a virtual machine, an error is presented:
Not Enough Failover Resources -
Which three scenarios are likely causes of this error message? (Choose three.)

A. The default VM Monitoring Sensitivity is set too high.

B. There are not enough datastore heartbeat datastores configured by default.

C. The default slot size in the cluster is set too high.

D. There are virtual machines with large CPU reservations.

E. A host is in maintenance mode for a replacement of a failed Hard Drive.

Which is the VDP appliance available storage configuration maximum?

A. 2 TB

B. 62 TB

C. 8 TB

D. 4 TB

An administrator configures vSphere Replication for a virtual machine and enables multiple point in time (PIT) instances under the recovery settings in the
Configure Replication wizard.
Which two statements are correct for vSphere Replication with multiple point in time instances enabled? (Choose two.)

A. vSphere Replication retains a number of snapshot instances of the virtual machine on the target site based on the retention policy that you specify.

B. vSphere Replication uses the virtual machine’s snapshot instances to define the target site Point in Time instance based on the retention policy that you specify.

C. vSphere Replication does not support virtual machines with snapshots.

D. vSphere Replication supports virtual machines with snapshots.

What two scenarios will prevent extending a VMDK that is attached to a powered on VM? (Choose two.)

A. VMDK has snapshots present.

B. VMDK is connected using LSI logic SAS controller.

C. VMDK is connected using IDE controller.

D. VMDK is running an unsupported Guest OS.

Which two are true about the Risk badge in vRealize Operations? (Choose two.)

A. The Risk badge indicates potential future problems that may degrade the performance of the system.

B. Risks may require attention in the near future.

C. The Risk badge indicates problems that are degrading performance of the system.

D. Risks require attention now to correct system performance problems.

What is required to create a vSphere Distributed Switch? (Choose two.)

A. A minimum of two physical uplinks is required.

B. vSphere Enterprise Plus licensing is required.

C. The host is added to a vCenter Server.

D. Login to the ESXi Host with the Root account.

Which two networking connection types can be configured on a virtual switch? (Choose two.)

A. Virtual machine portgroups

B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network

C. Web services over the Management Network

D. NFS and FCoE storage services

Which vSphere 6.x storage service provides array-based operations at the virtual disk level?

A. Local storage

B. Virtual Volumes

C. Virtual SAN

D. Datastores

Which two storage controller configurations can be used with Virtual SAN? (Choose two.)

A. SAS controllers in Passthrough mode

B. SAS controllers in RAID0 mode

C. SAS controllers in RAID1 mode

D. SAS controllers in RAID10 mode AB

A vSphere Administrator notices that they cannot login to vCenter Server with the vSphere Web Client, although the server is responding to pings.
What is the next step in troubleshooting the login problem?

A. /etc/init.d/hostd restart

B. connect-viserver-server

C. vim-cmd vmsvc/getallvms

D. service-control –status vmware-vpxd D

Refer to the Exhibit. An administrator has created the resource pool configuration shown in the Exhibit.
 
Based on the exhibit, which virtual machine(s) can be successfully powered on?

A. VM-M1 only

B. VM-K1 only

C. VM-K1 and VM-K2 only

D. VM-K1, VM-K2, and VM-M1

Which three conditions would prevent Storage I/O Control from being enabled on a group of datastores? (Choose three.)

A. The datastores planned for the solution are used by different vSphere clusters.

B. A datastore planned for the solution is configured as a Raw Device Mapping file.

C. A datastore planned for the solution has three extents.

D. A datastore planned for the solution is configured as NFS.

E. The organization has an Enterprise license.

A vSphere Administrator recently introduced a new shared storage solution for the ESXi hosts. Despite good device specifications, this new storage solution is not performing well.
What are two VMware-recommended troubleshooting steps for fixing this? (Choose two.)

A. Restart the vCenter Server.

B. Check the VMware Hardware Compatibility List.

C. Verify that vCenter Server is running the latest patched version.

D. Verify that the drivers and firmware are at the recommended versions.

E. Restart the Platform Services Controller.

Which two statements are true when configuring a virtual flash resources (vFlash)? (Choose two.)

A. Virtual Machines cannot reside on the virtual flash resource.

B. Only Shared Storage can be configured as a virtual flash resource.

C. vSphere DRS does not support vFlash resources.

D. vFlash resources are managed at the ESXi host level.

What is the optimal configuration when building a virtual machine for a single-threaded Windows application?

A. Deploy single-threaded applications on uniprocessor virtual machines.

B. Deploy single-threaded applications on symmetric multi-processor virtual machines.

C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.

D. Tune Single-threaded applications at the hypervisor level.

When managing search queries in vRealize Log Insight, what three actions can be performed? (Choose three.)

A. Share the Current Query

B. Load a Query

C. Take a Snapshot of a Query

D. Pause the Current Query

E. Duplicate a Query

What are the correct steps to migrate the storage of a virtual machine?

A. Option A

B. Option B

C. Option C

D. Option D

What is the VDP appliance available storage configuration maximum?

A. 62 TB

B. 2 TB

C. 4 TB

D. 8 TB

A vSphere Administrator notices that sometimes they receive poor network throughput for multiple port groups that reside on a vSwitch with multiple physical uplinks (vmnics). The configuration on the ESXi host is identical to other hosts that are working properly in the same cluster.
What should be done next?

A. Restart Management agents in ESXi Using Direct Console User Interface (DCUI).

B. Add additional port groups to the vSwitch.

C. Alter the failover order of the vmnics until a bad vmnic is found.

D. Add additional resources to the virtual machines that are powered on.

By default, how many login attempts will an ESXi host allow before locking out the account?

A. 7

B. 8

C. 10

D. 5

You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host.
How can this action be accomplished?

A. Configure the Advanced Settings > Annotations screen of the ESXi host.

B. This is configured from the Direct Console User Interface configuration menu.

C. It is not possible to configure a security banner for the ESXi host.

D. From vCenter Server, this setting is configured globally in the vCenter Server configuration. A

An administrator is performing an interactive installation of ESXi 6.x.
Which three options are available for installation? (Choose three.)

A. DVD

B. USB

C. PXE

D. Scripted

E. Auto Deploy

Which password meets the default password requirements in ESXi 6.x?

A. Xqavntthi3

B. xQA!3h

C. xTaMEhb!

D. Xqa_hin3

Which two allow for the disabling of Network Rollback operations? (Choose two.)

A. Modifying the vpxd advanded configuration options and adding the config.vpxd.network.rollback key

B. Modifying the C:ProgramDataVMwareCIScfgvmware-vpxvpxd.cfg file and adjusting the xml tag

C. Modifying the C:ProgramDataVMwareCIScfgvmware-vpxvpxd.cfg file and adjusting the xml tag

D. Modifying the C:ProgramDataVMwareCIScfgvmware-vpxfirstbootvpxd-service- spec.prop file and adjusting the xml tag

When attempting to access a virtual machine, an administrator is unable to login using the vSphere credentials.
What two options are probable causes of the authentication failure? (Choose two.)

A. The vSphere credentials have not been granted permissions.

B. The vSphere credentials are granted read-only permissions.

C. The vSphere credentials are granted no-access permissions.

D. The vSphere credentials are not a member of the local administrator group.

One of your virtual machines (VM) has performance issues and sometimes in unresponsive.
Which VM file must be checked in order to find the root cause?

A. vpxd.log

B. ds.log

C. vminst.log

D. vmware.log

Which option was added to the load balancing calculations of DRS in vSphere 6.5?

A. Network

B. Memory

C. Storage

D. CPU

Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.)

A. Single-Initiator

B. Single-Initiator-Single-Target

C. Multiple-Initiators-Single-Target

D. Multiple-Initiators-Multiple-Targets

A Long-Distance vMotion migration cannot complete.
Which three situations could cause this? (Choose three.)

A. The license currently in use for the two hosts in vSphere Enterprise Edition.

B. The round-trip time between the hosts is greater than 150 milliseconds.

C. The virtual machine is configured to use Virtual NVMe disks.

D. The vMotion traffic to the destination host is on the default TCP/IP stack.

E. The license currently in use for the two hosts is vSphere Enterprise Plus Edition.

When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected?

A. 1 min

B. 5 min

C. 10 min

D. 15min

Which two methods can a vSphere Administrator use to automatically synchronize time on an ESXi host? (Choose two.)

A. Log in to the VMware Host Client, navigate to Host > Manage > Time & date and click Edit settings.

B. Select the host in the vSphere Web Client, navigate to Configure > System > Time Configuration and click the Edit button.

C. Use the esxcli hardware clock get command in the ESXi Shell.

D. The vicfg-ntp command.

E. Configure the VMware Tools time synchronization. BE

A vSphere Administrator sees the alarm:
vSphere HA virtual machine failed to failover
This occurred for a number of virtual machines on a particular ESXi host in a cluster with vSphere High Availability (HA) enabled. The virtual machines guest operating systems never reported a power event.
What happened?

A. The virtual machines were vMotioned off of the ESXi host.

B. The ESXi host is still running but has disconnected from the network.

C. The ESXi host failed and vSphere HA successfully failed over the virtual machines.

D. The previous virtual machine cloning operations failed to complete.

A VM has the following configuration:
✑ 2 vCPU
✑ 4 GB RAM
✑ HDD1 10 GB
✑ HDD2 20 GB
A vSphere Administrator creates a snapshot of a powered off VM.
What is the maximum size of all of the snapshots that can be consumed on the datastore?

A. 30 GB

B. 100% of the datastore minus 512 bytes

C. 34 GB

D. 50% of the datastore

Which virtual switch load balancing method should be used when teaming network interfaces with EtherChannel?

A. Route based on originating virtual port.

B. Route based on IP hash.

C. Route based on physical NIC load.

D. Route based on source MAC hash.

E. Use explicit failover order.

Which two components can be used when configuring Enhanced Linked Mode? (Choose two.)

A. vCenter Server Appliance

B. vRealize Operations Manager

C. vSphere Management Appliance

D. vCenter Server for Windows

A Primary Fault Tolerant VM is performing poorly despite its ESXi host having adequate resources and CPUs are idle. Other hosts in the cluster are much more heavily utilized.
What is the cause?

A. The Secondary VM is assigned to a different portgroup than the Primary.

B. The Secondary VM is running more applications than the Primary.

C. The Secondary VM is running on an ESXi host that is overcommitted.

D. The vMotion network has not been configured for Jumbo Frames.

Which two actions are required when enabling vFlash Read Cache for a virtual machine's virtual disk? (Choose two.)

A. A value in the Virtual Flash Read Cache text box must be entered.

B. A Flash Resource Pool for Cache size reservation must be entered.

C. The Device backing and the block size must be configured.

D. The Enable virtual flash host swap cache check box must be selected.

An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host.
What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?

A. 24

B. 48

C. 64

D. 128